Новости

Bows of satin ribbons (61 photos) - step-by-step master classes for beginners

From the satin and repus tape you can create delicious ornaments for hair, brooches, pins and other elements of the decor of clothing and interior. Each thing attracts her eyesight with its exclusivity, as in most cases is made in a single instance manually.

The technique of manufacture is simple, each with due diligence can easily master the manufacture of bows and accessories from the ribbons. The main thing is to stock up of patience and the necessary materials. Using additional decorative elements, it is possible to easily easily make elegant bows for hairpins, rims, brooches, bags, telephone covers, clothes.

Elegant classic

Simple, but a beautiful bow can be made literally in a couple of minutes. It is based on the classic method of manufacturing bows. To work, you will need a tape, a thread for sewing or hot glue.

A simple master class includes the following steps:

  1. Take a small cut ribbon of any color.
  2. Alternately, on both ends, throw the tape on the index finger, forming a loop.
  3. One loop to push to another and tighten.
  4. Bow ready.

Atlasal tapes facial and auto side are distinguished. When creating loops, you need to make the front side be outside. It has a glossy effect, a calm brilliance, the annoying side is faded, dim.

Decor from gifts for decoration

Having learned to make a simple and cute bow, you can go further and apply reception for decorations of anything, such as gift packaging. For this case, you will need a more magnificent bow, but it is based on all the same two hinges, worn alone to another.

Step-by-step master class such:

  1. Fix the tape with two fingers and make a ring from it.
  2. Put a few turns, holding new rings in the middle.
  3. Prepare a small cut of a thin tape in advance.
  4. Thin tape tower a bow in the center, straighten the petals.

Lush rich bow ready to decorate any festive packaging. He always looks beautiful, no gift is not necessary without it. A gift, for the design of which came up with love, leaves the best emotions and is remembered for a long time.

Elegant bow

Sometimes instead of pomp and glossy low-rise satin ribbons, modest elegance is required. Bows from the reps ribbons look seriously, with a claim to solidity. Small accessories from the reps tapes are decorated with business suits, hats, bags, and imperative hair. Reply tapes are denser in structure, can take and hold the form, have a matte, corrugated surface.

Step-by-step master class:

  1. Prepare two small cuts of rep and ribbon of any color. Cut length depends on the size of the future bow.
  2. Shape the ring from each tape and put them on each other.
  3. On the rings lying on top of another crosswise, put the third piece in a horizontal position.
  4. At the middle of the glue drop and flash all three ribbons.
  5. Prepare two more cuts of tape. One small size for wrapping the workpiece in the center, the second is slightly longer than the rings, the edges to be treated in the form of a check mark.
  6. Little piece wrap the bow in the middle, and fix glue.
  7. Long cut in the treated edges to sew the back.

A piece of ribbon with gear edges turns a simple bow into the original accessory, giving it volume and completion. The edges decorated with cloths or oblique line make the craft ready.

Butterfly Bowls for Children's Clump

In the summer season, Moms try to decorate hairstyles of their daughters and buy expensive hairpins of dubious production, which quickly lose its commodity appearance. Bows from the ribbons adorable adorn the heads of young fashionistas, and make them independently quite simple. In addition, the hairpin, which Mom made her hands, the daughter fell for many years.

For work, the satin tape of your favorite color is required, the base for the hairpin. The basis can be purchased in any needlework store. It is a lightweight metal mechanism with a latch, and an open area to accommodate the decor.

The master class contains several simple steps, resulting in a beautiful accessory.

  1. Take two equal to the length of a piece of ribbon.
  2. Form two rings.
  3. Connect rings in the middle, fix with glue or thread.
  4. A short cut of the ribbon to wrap the crossed rings in the middle and glue.
  5. On the front side of the tape in the center to glue beads or beads.

A bow made in this way looks elegant and feminine. It is very popular at mom-needlewomen who decorate them the heads of their young fashionistas.

Flower holiday

For this accessory, there will be a wide satin ribbon, about 4 cm. Petals are performed from it that perform the basis of the flower.

  1. 6 pieces of equal length are cut from the ribbon.
  2. Cuts alternately ride on the thread and tighten, forming petals.
  3. From a narrow tape (in the width of 1.5-2 cm), 6 pieces are cut into the same colors. Similarly, they are riveted on the thread after each other and slightly tightened.
  4. The layer of petals from a narrow tape is applied to the bottom layer and stitched together.
  5. On top of the center place a brilliant decor element (beads, beads, decorative stone). Between the layers of petals can be placed the contour element from the rhinestone, made in the form of a flower.

As a dense base from the wrong side, a small circle of felt is glued, and the fastener or pin is placed on it. Two-layer bow gives expanses for fantasy. It is originally looking for alternations of colors and tapes, a game with decor and decoration.

Bow-star

Before starting work, it is necessary to prepare a pair of cardboard patterns in the form of a five-pointed star with medium length links. In the center they do a hole with a diameter of no more than 1 cm. If satin ribbons are bored, then a lace braid can be used. It gives the product the effect of wealth, style.

  1. Lace passes through the hole, leaving a small tail.
  2. Wash the flashes around the links of the star, forming symmetric loops. So that the loops "did not run away" lace hold two fingers.
  3. When all cardboard links are covered with lace, they are carefully removed from under loops. Stick in the center. From the reverse side, sew a button or a tight felt circle.

The most difficult execution of bows from satin ribbons is Kanzashi. They are multi-layer flowers with triangular petals. On the Internet on thematic sites in abundance published a photo of Kanzashi and master classes, which can be inspired by their own craft.

Photo of the ideas of homemade bows from satin ribbons

How to make bows of satin ribbons

Bow on hands from satin ribbon

Satin ribbons are the most favorite and affordable material. And we offer to start with them. If you are a novice in this matter, first you should learn to tie a beautiful bow from the finished ribbon on your hands. Make it quite easy.

This is a very simple tying technique. And we will help you: carefully follow this step-by-step video. A little time, attention, and you will definitely work out!

How to starch the satin ribbon?

To close the satin ribbon, you will need starch and water.

The proportions are: for one art. Spoon Starch Take one glass of water. First, dissolve starch about a third of a cup of cold water. Put the remaining water to bask on the stove. As soon as it boils, a very thin ridge pour dissolved starch into it. Constantly stirring, cook for about 5 minutes.

Remove from the fire, cool slightly and put in a mixture with a tape. Keep 20 minutes. Then squeeze, dry and join the paper.

Now you can make a bow of a ribbon, it will be less frighed and keep a good shape!

Beautifully tying a small bow on the fingers

If you do not know how to tie a bow from the tape on your fingers, these photos will help you with this. There is nothing complicated here too. Of course, you first stand a little stretch, but then you will do it with ease.

On the fingers a mini bow

This cute little bow can be decorated with hairstyles, clothes or handbags. In addition, this is the fastest way to beautifully tie a bow from the satin ribbon. On our pictures you can see more and more detail.

Double mini banta tying scheme on fork

Charming small bowls from satin ribbons can be tied in a very unusual way - with the help of the real table appliance - forks! Do not be surprised. These baby bows will decorate a funny postcard, hairstyle or clothes of pupae, rubberry or hairpin for little girls.

The master class in their manufacture is presented on our photos.

Double mini bug on fork photo MK

A very tiny bow can be tied even on a comb!

Classic School Booth from Kapron Tape

The classic will always be in fashion. It is appropriate anyway. The same applies to wide bows, especially school. What kind of hairstyle is associated with the holiday of first-graders on September 1, the last call or graduation? Right! With white big bows on your head!

We suggest you do just such. It is very elegant and volumetric. Perfectly decorate tails and pigtails. About how to make it stages, read below in our material.

White bows balls

Before proceeding with work, prepare not too short segment of the kapron tape. The optimal length is about one meter. And the width should be at least ten centimeters.

  1. To begin with, our ribbon you need to take, bend it very carefully in half. And then free edges be sure to be made by pins.
  2. The edges that are on the sides, you need to fall as a match or lighter. Do it quickly, so as not to burn all the product. Then scroll these edges too with each other.
  3. To this edge, where you sewed two ends, see any hair band chosen.
  4. Now keep sturdy threads along the fold line.
  5. Remove the pins and accurately roll up and pull the tape.
  6. Manually form a magnificent bow and once again squeak it with a needle with a thread.

Interestingly, the classic method of tie a bowl is called more French. And therefore, dear readers, do not look for a French bow, this is our, familiar and beloved - classic!

How to make bows from satin ribbon: step-by-step instructions

Satin ribbons are the most popular material for creating small masterpieces. Smooth, brilliant, relatively inexpensive ribbons always attracted the attention of needlewomen from around the world. The material was used in various fields of creativity, not the exception of steel and decorations based on various types of bows.

You can use ribbons of different widths to create accessories, but it all depends on the selected design and technology of execution. Let's start with the easiest species.

The easiest classic bow

A basic bow, which must learn to make any beginner, is presented below. For him, you can take both a narrow and very wide ribbon - it will turn out of any.

Work process:

  1. Fold the tape by throwing the two halves to the index fingers of both hands.
  2. Cross the half and shake one to another.
  3. Tighten the product. Ready!

On the basis of such a bow, you can make a chic decoration. It will only be enough to pour it with waterproof glue or brilliant acrylic varnish, then attach the rings to which the chain will be fastened.

The same bow will not be difficult to tie on the fork, with its help it will turn out to be more neat and even (although on the fingers you can create a very beautiful accessory). Also, for such an "helper" there is a limit - it will be useful only when creating very small bows, for larger products will have to resort to the traditional method.

Double ribbon

A double bow is performed somewhat different from the previous way. For him, two ribbons come in handy and a separately created middle, resulting in seating of edges.

Two rings fold in the middle and sew or glue so that they come into contact with the side parts. After that, the middle is closed in advance made part. The design can be attached to the hairpin or rubber band.

Note! For this accessory, it is necessary to take a middle or wide ribbon, from a thin, narrow material of such beauty will not be released. If your choice goes on a width of 2.5-5 cm, it will be an ideal solution.

The variation of such a bow of two tapes can be such analogue: in this case, two rings are superimposed by the middle of each other. You can also experiment with the color scheme - for example, create a red or green bow or even combine one or more shades in one product.

Tip! Try to make more two layers, take ribbons of different widths and textures. Thus, from one scheme for creating a bow, you can create a variety of aged accessories.

Multilayer magnificent bow

Excellent option for schoolgirls and not only. Such a bow is easy to put on a hairpin or comb to attach to the hair. Based on two simple bows discussed earlier.

To make such a thing, you will need to make the basis of two layers superimposed on each other. Of the tapes folded in this way, the rear part will turn out. The front is similar to the easiest first bow. At the end, they must be connected with glue or thread. All together is fastened with a central piece.

Thus, you can receive more volumetric accessories as the white bow below. Here is one difference - there are no two layers at the base, but three.

Romantic and exquisite, such an addition to the image will please any graduate, which will want to give nostalgia. But this option, unlike decorations for girls, more adult and feminine, namely, it is necessary in such cases.

Twisted bow of 3-4 ribbons

Very beautiful bow, which is well suitable for decorating on the head. For this, three or four (or even more) a piece of ribbon of one width, but different lengths need to be sewed with infinity and put one in another. Main issue as a few MK earlier.

Perfect lush bow in 15 minutes

Perfect magnificent bow

Master Class

Cut off the four pieces of atlas: the two largest - the same length, one more - smaller and one more very short (we use it as a jumper).

We sew or glue with each other short sides first with one long, and then one middle strip. It turns out two rings as in the photo below:

We put them in half the seams down, put one more small detail. Stitch or glue in the center.

Slightly suggest a bow in the center:

The remaining short piece we bring to the long sides inside until the middle, like this:

Gently turning the jumper bow with the bottom of the second long strip inserted:

Stitch or glue the jumper.

So that the bow watched is neat, cut off the bottom of the "tails" of the painter. In the case of a satin ribbon, you can carefully treat sections with a lighter.

Bow ready! If you wish to make it even more lush, make three or even four rings, most importantly - so that every next thing is slightly less than the previous one;)

Elegant bow

Sometimes instead of pomp and glossy low-rise satin ribbons, modest elegance is required. Bows from the reps ribbons look seriously, with a claim to solidity. Small accessories from the reps tapes are decorated with business suits, hats, bags, and imperative hair. Reply tapes are denser in structure, can take and hold the form, have a matte, corrugated surface.

Step-by-step master class:

  1. Prepare two small cuts of rep and ribbon of any color. Cut length depends on the size of the future bow.
  2. Shape the ring from each tape and put them on each other.
  3. On the rings lying on top of another crosswise, put the third piece in a horizontal position.
  4. At the middle of the glue drop and flash all three ribbons.
  5. Prepare two more cuts of tape. One small size for wrapping the workpiece in the center, the second is slightly longer than the rings, the edges to be treated in the form of a check mark.
  6. Little piece wrap the bow in the middle, and fix glue.
  7. Long cut in the treated edges to sew the back.

A piece of ribbon with gear edges turns a simple bow into the original accessory, giving it volume and completion. The edges decorated with cloths or oblique line make the craft ready.

Elegant classic

Simple, but a beautiful bow can be made literally in a couple of minutes. It is based on the classic method of manufacturing bows. To work, you will need a tape, a thread for sewing or hot glue.

A simple master class includes the following steps:

  1. Take a small cut ribbon of any color.
  2. Alternately, on both ends, throw the tape on the index finger, forming a loop.
  3. One loop to push to another and tighten.
  4. Bow ready.

Atlasal tapes facial and auto side are distinguished. When creating loops, you need to make the front side be outside. It has a glossy effect, a calm brilliance, the annoying side is faded, dim.

Dior

  1. You can roll such a bow, without using the auxiliary instruments. To fix the resulting design, we need glue for textiles. After working, its surplus is carefully cleaned with a napkin.
  2. Fold in half the segment of the fabric.
  3. Apply glue at the place of the joint, smooth out irregularities.
  4. Wrap the place of connection of the tape contrasting color, fixing the ends from the back

The finished product can be used for a gift or as a costume decor. If you attach a metal ring, an elegant accessory will easily turn into an original key chain.

(+115 photos) Bows from satin ribbons with their own hands

Polka Dot Bows for School

Materials:

  • 2,5 cm tape width, white and peas color,
  • 2 cm lace width,
  • Middle.

We will make a simple bow of the ribbon in polka dot and lace. Such a bow can even make a novice master. We apply a segment of a white ribbon 3 pcs. 22 cm, in peas 3 pcs. 24 cm. We will connect all the segments.

(+115 photos) Bows from satin ribbons with their own hands

(+115 photos) Bows from satin ribbons with their own hands

(+115 photos) Bows from satin ribbons with their own hands

  • On one white leave and sew the lace. From the rest, we will make bows: from white - double, from ribbons in polka dot - triple.

(+115 photos) Bows from satin ribbons with their own hands

(+115 photos) Bows from satin ribbons with their own hands

(+115 photos) Bows from satin ribbons with their own hands

  • We assign bows to each other. First in polka dots, on it white, top with lace. We sew all layers. Freeding a middle and a rubber band on a felt patch with a diameter of 2-2.5 cm. I got not only school bows, but also a tie.

(+115 photos) Bows from satin ribbons with their own hands

(+115 photos) Bows from satin ribbons with their own hands

(+115 photos) Bows from satin ribbons with their own hands

Minnie Mouse style

The child will be delighted with such a gift. For work, the sharpened scissors, a needle and threads are needed. Sew the accessory on the machine will be faster than manually.

How to make a giant "Spring"

This cracker can be created as one-color and in two colors. You can attach it to the hairpin, rim, bracelet, etc. You can also make it from the St. George ribbon by May 9th. It will come out simply!

(+115 photos) Bows from satin ribbons with their own hands

What you need:

  • Silk tapes of pink and olive shade 2.5 cm wide;
  • a small piece of a brick tape with a width of 0.6 cm;
  • threads, needle;
  • glue universal or adhesive gun;
  • line;
  • pins;
  • scissors.

Step 1

  • Cut 50 cm from the pink tape of 2.5 cm.

(+115 photos) Bows from satin ribbons with their own hands

  • Bend this segment by half the involve side. Well, join the fold line.

(+115 photos) Bows from satin ribbons with their own hands

  • Also squeeze your fingers in the middle of both ends of the tape, the invalid side.

(+115 photos) Bows from satin ribbons with their own hands

  • Wrap one end of the tape with the invalid side to the middle line, exactly for previously formed bends. Scalinate a pin.

(+115 photos) Bows from satin ribbons with their own hands

  • In the same way, bend to the middle of the second edge of the tape. Scalinate a pin.

(+115 photos) Bows from satin ribbons with their own hands

  • Fold the cradle twice. Fit the tops well.

(+115 photos) Bows from satin ribbons with their own hands

  • Expand back. Turn over.

(+115 photos) Bows from satin ribbons with their own hands

  • Wrap the left edge to the center. Install it so that the point of intersection of the two lower tapes was in the upper point of the stroke line. Scalinate a pin.

(+115 photos) Bows from satin ribbons with their own hands

  • Repeat on the other hand.

(+115 photos) Bows from satin ribbons with their own hands

  • Now take the needle and thread. Tie a nodule. Purge the central part of the craft of small stitches. Do not cut a thread.

(+115 photos) Bows from satin ribbons with their own hands

  • Pull the thread on yourself and take the center of the crafts. Additionally wrap it with several turns. Secure the thread and cut. The top you did.

(+115 photos) Bows from satin ribbons with their own hands

Step 2.

  • Cut 3 pieces of 12 cm long each from an olive tension of a 2.5 cm wide.

(+115 photos) Bows from satin ribbons with their own hands

  • Take one piece and fold half of its edges with an invalid side.

(+115 photos) Bows from satin ribbons with their own hands

  • Returning from top 1.5 cm, cut out the corner diagonally. Start from the middle, moving to the extreme points.

(+115 photos) Bows from satin ribbons with their own hands

  • Repeat on the other side. Clearly stick to these instructions, and your ribbons will be carefully and symmetrically cropped.

(+115 photos) Bows from satin ribbons with their own hands

  • Similarly, cut the rest of the pieces.

(+115 photos) Bows from satin ribbons with their own hands

  • Now put all 3 pieces smoothly at each other.

(+115 photos) Bows from satin ribbons with their own hands

  • Take the needle with the thread. Tie a nodule. Purge the central part of the segments with one stitch, while engaging them all together. Cut the thread.

(+115 photos) Bows from satin ribbons with their own hands

  • Now expand pieces. Position them so that their parties form rays, like a drawn star.

(+115 photos) Bows from satin ribbons with their own hands

  • Build a central part of the figure. Needle with a thread, hurt her.

(+115 photos) Bows from satin ribbons with their own hands

  • Pull the thread on yourself. Tighten the central part. Additionally wrap it with several turns of thread.

(+115 photos) Bows from satin ribbons with their own hands

  • The bottom of you made.

Step 3.

  • Place the upper part on the bottom. Connect them together with several turns of thread.

(+115 photos) Bows from satin ribbons with their own hands

  • Cut a small piece of a golden tape of a golden shade with a width of 0.6 cm. Place its ends with a lighter.

(+115 photos) Bows from satin ribbons with their own hands

  • Wrap this piece around the central part, periodically scrubbing it on the back of the glue. End Fasten on the back of crafts. Ready!

(+115 photos) Bows from satin ribbons with their own hands

And if you make this bow from the ribbon of the same color, it will be easily like this.

(+115 photos) Bows from satin ribbons with their own hands

Large bow of satin ribbons in the form of a flower

For work prepare:

  • Wide satin tape (for this bow used 8 cm width, it is possible less) -150 cm;
  • scissors;
  • threads;
  • needle;
  • beads or rhinestones;
  • Brook-brook for the core;
  • felt;
  • Adhesive pistol.

Master Class

Option first

We fold a long tape into the harmonica and tie in the center of the thread in the tone.

Soak each loop and gently straighten. Between loops we sew large rhinestones or beads.

Option two

More complicated, but more inactive.

Cut the ribbon to 29 identical segments. It is advisable to take a satin tape with a rigid edging - so the bow will be better to keep the form!

Next, take the segment, fold it twice, overlapping one edge of the tape to another. Stitch or glue edges. We repeat the same with the remaining ribbons.

Next, sew the details in four flower 9, 8, 7 and 5 petals.

Cut from a dense felt a circle.

We apply glue and alternately glue the flowers, starting from the largest and ending with the smallest.

The middle decorate the brother or beads and beads.

Luxurious lush bow do it yourself

For work prepare:

  • Satin tape (the more you need a bow, the longer and wider than the tape);
  • Clocks-crocodiles, paper clips or paper clips;
  • thread;
  • needle;
  • glue pistol;
  • the foundation for the hairpin;
  • cardboard;
  • pencil;
  • scissors;
  • Candle for cutting cuts.

Master Class

First we make a template - cut the square from the cardboard. More square - more bow. In the center cut out a long narrow recess (width of about 5 mm).

We have a satin ribbon, as shown in the photo, fix the clip and cut the end, so that it is a little longer the edge of the template.

Wrap a ribbon, as shown in the photo, and fix it. After completing three turns, cut the tip.

We take a needle with a thread and with a recess in the template we derive a needle. We flash all three turns of the seam "forward needle" and remove the ribbon from the template.

We assign a bow in the center.

We drag on the thread so that you can fix the base for the nipple below it. If necessary, we perform some more neat locking stitches.

We take a narrow tape, turn around the bow in the center and with the help of hot glue fix on the back side, simultaneously masking the locking seam under it.

Bow ready!

In Kanzashi technique

Recently, this technique especially loved with needlewomen due to its unusualness. In Kanzashi technique, you can perform a cute volumetric bow from satin ribbons even beginners:

  1. To begin with, we define with the materials. Since we work in Kanzashi, in addition to the tape, we also come in handy and wire.
  2. Cut the desired amount of material and put it on the table or any other level surface.
  3. We form two loops from the material. Tape edges impose on each other and fold in the middle. Hold your finger center so that our billet does not lose form.
  4. Tightly wind the center of the bow of the wire. So that the wire does not spoil the species - disguise it with a thin ribbon.
  5. Holding to the same sequence of actions, make other workpieces. To achieve pomp, we put the blanks on each other.

(+67 photos) how to make a bow with your own hands from the tape

Two-color and gift

From the ribbons of two different colors, you can create an elegant and stylish decoration. This technology is suitable even for beginners. This product you can decorate a stylish elegant dress and beautifully laid hairstyles. It is necessary to prepare a wide and thin piece of tape with a length of 15 cm each.

Step-by-step instructions for creating bows from ribbons with their own hands:

(+67 photos) how to make a bow with your own hands from the tape

  1. To begin with, measure the ribbon of the required size.
  2. Place one on the second and fold the ring.
  3. Connect the product blank is necessary with the help of glue, and then stroke.
  4. Publish a narrow tape in the center of the bow to close the place of connection of the ends. Must get a node.
  5. Ends need to cut off and put down.
  6. If a box with a gift to decorate a bow made with your own hands, she will look much better. Depending on the situation, it can be made lush and voluminous or modest, but elegant.

This option is very simple and easy to make an instruction:

  1. You must take a ribbon up to 2 meters long.
  2. It should be wounded on the revealed palm of the left hand, and then carefully remove it.
  3. The end should stay free.
  4. On one side of the workpiece you need to cut both corners, approximately 5 millimeters.
  5. In order to cut the tape on the cut, it must be accurately burned.
  6. The same procedure must be done on the second side.
  7. Next, the workpiece must be combined so that the cut parts are connected in the center.
  8. Ribbons should be tied with a free end.
  9. After that, each petal is painted to give the shape and volume.

(+67 photos) how to make a bow with your own hands from the tape

An independently created magnificent bow can please the young girl if it is an ornament on a festive box or woven into a beautiful hairstyle.

In order for such a bow to do, it is necessary to have 6 pieces of ribbons with a width of 5 cm and a length of 12 cm, as well as 6 blanks of 3 cm in width and 11 cm - in length. Everyone will need to burn carefully around the edges, so as not to be blown. Additional materials will serve a piece of feta, small beads and a thin elegant tape.

How to make a handsome bow from the ribbon step by step:

(+67 photos) how to make a bow with your own hands from the tape

  1. First, you should take the wider segments and fold them twice.
  2. After that, consistently assemble for one thread, pull out well and secure.
  3. These manipulations repeat for narrow segments.
  4. Cut the circle from feta, the diameter of which should be about 4 centimeters, and then glue a large billet to it.
  5. Take a thin braid, the length of which should be 12 centimeters. These segments need 6 pieces. Each fold ring.
  6. Having imposed on the petals, glue from the front side.
  7. Fix the product from the top of a narrow variation.
  8. On a piece of fabric, a diameter of 1 centimeter, pour a small amount of glue.
  9. Tightly in a circle place beads and cut.
  10. Decor is accommodated in the center and fix with glue.

With a plug, you can make a small decoration for the postcard. The process should include such actions:

  1. In the left hand you need to take the plug.
  2. Loop at her small ribbon, so that the edges be on the right.
  3. Next you need to roll through the bottom front end of the long-term fork.
  4. To do this, it needs to be removed between the teeth in the center and take the rear.
  5. Another end must be started in the same hole, only on top.
  6. After that, you need to turn the plug and bind both ends with two nodes.
  7. The resulting decoration is removed from the fork and cut the tips. So that they do not bloom, they need to neatly fall.

How beautiful to tie bows on September 1

The most popular decoration of hairstyles on September 1 is a bow. Bows from tapes: satin, wide, kapronova. Kanzashi technique, how to make a beautiful, school, big, lush, bulk, simple

It can be tied up with one of the 3 ways:

  • Collection bow;
  • 4 petals;
  • Luxurious flower.

For the 1st option, you will need a wide ribbon and gum.

  1. Hair is collected together and tie a rubber band.
  2. Then the ribbon turn the hair, one edge of the ribbon is left long, the other short.
  3. Long end folds several times and tied up short. Bow ready.

Bow "4 petal" is done like this:

  • The collected hair is wrapped with a ribbon and tie into a single knot, the ends of the ribbon should be the same;
  • From the tails fold the loops and tie a classic bow;
  • The remaining ends also fold and tie.

Before creating the next hairstyle, you must prepare the tape:

  • flash ribbon along the center;
  • collect accordion;
  • Give a ribbon shape of a bow or flower and sew.

Attach the bow to the gum, collect the hair together, pull the rubber band.

Booth of a wide ribbon

It will look very beautiful and originally a bow from a wide monophonic tape, if a narrow strip with an ornament will pass along the entire length along the entire length. Bows from tapes: satin, wide, kapronova. Kanzashi technique, how to make a beautiful, school, big, lush, bulk, simple

Bath creation scheme:

  • decompose a wide strip of tape on the table;
  • Along the middle line and at the edges, attach a narrow bright strip of hidden stitches with a drawing;
  • finished tissue strip roll into hand;
  • tie;
  • Remove with your arms and straighten.

Bow on a gift box

Volumetric bows will always be appropriate on gift boxes.

Bow-ball making:

  • tape folded in several layers;
  • The resulting rectangle cut corners;
  • Move cuts to the center, carefully moving the tape;
  • The most narrow part of the tape is well tightened;
  • In turn, pull out all the loops, forming a ball. Bows from tapes: satin, wide, kapronova. Kanzashi technique, how to make a beautiful, school, big, lush, bulk, simple

To create a lush bow, you will need 3 ribbons different in width.

  1. The lane is medium width to lay in 4 layers, layers should be located over the other.
  2. Also folded a wide band and place the Cross-cross-tier tiers.
  3. Place the 1st bow from above on the 2nd.
  4. Center to pull the thin ribbon.

Sources

  • https://mirpozitiva.ru/articles/36027-kak-sdelat-bantik-iz-lenty-svoimi-rukami.html
  • https://nyaskory.ru/podarki-svoimi-rukami/banty-iz-lent.html
  • http://portniha.com/dlya-detej/kak-sdelat-bantiki-iz-atlasnoj-thing-svoimi-rukami-poshagovaya-instrukciya.html
  • https://gidrukodeliya.ru/banty-iz-lent-svoimi-rukami.
  • https://-r-s.ru/banty-iz-atlasnyh-lent-svoimi-rukami/
  • https://-r-s.ru/kak-sdelat-bantik-svoimi-rukami-iz-lenty/
  • https://handsmake.ru/kak-zavyazat-bantik-iz-lentochki.html

[Collapse]

If you love holidays - love to beautifully decorate your home, decorate the premises before the holidays, pampering our close presents and their original design, then be sure to study the presented simple workshops, how to create Bates from ribbons do it yourself . There are only a few simple movements and a simple tape to turn into a lush, bulk bow. We are confident that such master classes must be useful to you, even if you are a small checkety lover, now you do not have to seek help with packing gifts for a holiday, for example, if you want to originally present crafts for the new year 2019

.

Bates from ribbons do it yourself: photo

Surely you have ever seen how beautifully decorate gifts Bows of satin ribbons do it yourself And today you will learn how to do it, putting at least efforts. Only at first glance it seems that this is a task for the real professional, but today you will be convinced about the opposite. And the secret of our simple master class lies in a special template, we'll talk about it next:

  • 2.5 cm ribbons width

  • Cardboard Puzzled

  • Needle with thread

  • Glue gun

Such bowl bowls can become an element of decor, they can be used to decorate gifts, and you can take such an idea as a basis for creating hair accessories. For example, if knowledge is organized in kindergarten

, For girls, you can cook such hair decorations so that they feel like real schoolgirls who come on September 1 to school in a festive form.

Bates from ribbons do it yourself: the best ideas with photos

First, we need to cook a pattern, for him we took a dense corrugated cardboard (any box is suitable). As a template, we will have a star with a seven rays, as we make a big bow, then the template should be big, in our case there was a circle with a diameter of 17 cm. In the center of the template it is necessary to do a hole that we will use to fix the edge Ribbons. And even for the convenience of the rays of the stars, we numbered, so you definitely do not confuse into the number of ribbon turns.

On average, one lush product will take 6 meters of ribbon, but it is better to take with a margin. You can not cut off the piece from the whole bobbin not to make a mistake. First, you need to skip the tape tip and fix it, after starting to pay everything better, moving in that order - 1-5-2-6-3-7-4. It will be the first circle of winding, and all of them need to do five, then the product will be beautiful and voluminous. Thus, on the template in us should turn out only 35 kettles.

Bates from ribbons do it yourself: the best ideas with photos

In the center, all lines must be combined, and fasten them with a needle with a thread, flashing with several stitches with a tape "design". But it is necessary to flash not tightly, but leaving the layers of moving relative to each other.

After that, you can start removing the loops from the template, then fix them. We had a "tail", which must be wrapped in the form of another loop, and the tip is glued to the center.

As you can see, we turned out volumetric Bows from ribbons do it yourself, photo Of course, they cannot convey their size, but you can believe us for the word - their diameter turned out 16 cm. You can make a bow and smaller diameter, then you need to make a smaller pattern and take narrower ribbons.

Bates from ribbons do it yourself: the best ideas with photos

Bates from ribbons do it yourself: Step by step photo

Let's look at a few more simple solutions, how to fold Bates from ribbons do it yourself, step by step photo Tell you how to do it. You know how many lifehams on the Internet can be found, which are designed to alleviate your life, it is not surprising that the masters have ideas, how to minimize the complexity with the tie of the bows of the most different size. For example, if you do an independent invitation to the ceremony, guided by the presented wedding councils

You can decorate them with miniature snow-white bows.

That is how we stumbled upon a whole adaptation to the tie of the bows, it has four sides and several teeth, thanks to which you can get decorating a different size. Of course, you will consider the stupidity to spend money on such a device, so we suggest you use the template and make such a cardboard device yourself.

Bates from ribbons do it yourself: the best ideas with photos

In the photo you can see what is simpler make a bow from the ribbon do it yourself : The tip must be fixed with a finger just above the teeth, crush the ribbon around the two teeth, then the second end to skip into the hole in the middle (between the teeth), make a loop and skip the end into this loop, strongly tightening it. It remains only to remove the bow from the device and disperse the turns.

Special devices are definitely an interesting idea, but we will teach you to tie a miniature Bows from ribbons do it yourself. Master Class It will be reduced using the most familiar table appliance - forks.

  • Narrow ribbon

  • Fork with four teeth

  • Scissors

Bates from ribbons do it yourself: the best ideas with photos

We will need a segment at least 15 cm. One end should be left short, and the second to make the turns around the fork's teeth. The long edge of the ribbons should be wrapped around all the teeth, then turn between 2-3 teeth. Now the second end should be missed between 2-3 teeth, after which both tips from us were on the back side of the fork and can be tied up with a nodule. When you remove the plug, then you will get a miniature bow.

Bates from ribbons do it yourself: the best ideas with photos

Now you know how to create Bow from ribbon do it yourself, step by step Description and photos will be your assistants in this process. With the help of the same fork, you can get a double bow, but for this it will be necessary to crush the cloves with several layers of ribbons. Such miniature bows can be glued to the hairpins or invisible, and you will get a bright and original hair accessory for your daughter.

Bates from ribbons do it yourself: the best ideas with photos

If you want to learn more about creating hair accessories, we recommend that you familiarize yourself with Kanzashi technique, which allows you to perform stylish gum and clips, decorated with lush bows and flowers.

Beautiful bows from ribbons do it yourself: 100 ideas with photos

Beautiful gates from ribbonsBeautiful gates from ribbonsBeautiful gates from ribbonsBeautiful gates from ribbons
Beautiful gates from ribbonsBeautiful gates from ribbons
Beautiful gates from ribbonsBeautiful gates from ribbonsBeautiful gates from ribbonsBeautiful gates from ribbonsBeautiful gates from ribbonsBeautiful gates from ribbonsBeautiful gates from ribbonsBeautiful gates from ribbonsBeautiful gates from ribbonsBeautiful gates from ribbonsBeautiful gates from ribbonsBeautiful gates from ribbonsBeautiful gates from ribbonsBeautiful gates from ribbonsBeautiful gates from ribbonsBeautiful gates from ribbonsBeautiful gates from ribbonsBeautiful gates from ribbonsBeautiful gates from ribbonsBeautiful gates from ribbonsBeautiful gates from ribbonsBeautiful gates from ribbonsBeautiful gates from ribbonsBeautiful gates from ribbonsBeautiful gates from ribbonsBeautiful gates from ribbonsBeautiful gates from ribbonsBeautiful gates from ribbonsBeautiful gates from ribbonsBeautiful gates from ribbonsBeautiful gates from ribbonsBeautiful gates from ribbonsBeautiful gates from ribbonsBeautiful gates from ribbonsBeautiful gates from ribbonsBeautiful gates from ribbonsBeautiful gates from ribbonsBeautiful gates from ribbons

Crafts made are becoming increasingly popular. As a decor for clothes, interior design, hair decorations of different lengths. Satin ribbons and crafts of them attract attention and harmoniously look in her hairstyle.

Kanzashi, namely the so-called needlework from the tapes, accessible to everyone, the assembly technique will be lit and the child. Such an exciting occupation contributes not only to the development of small motility and creative skills, but also practical possession of sewing accessories.

Simple and beautiful canzas for beginners. Excellent hobby, beautiful flowers in the Japanese execution technique are a decoration for hair, a decorative accessory, an addition to clothing.

On the pages of our site you will find master classes, how to collect bows from tapes, how to choose the right material for crafts.

History of origin

This kind of art originated in Japan a few centuries ago and belongs to the geisham, who wore jewelry with the traditional, festive outfit - Kimono.

In the original it sounds like Kandzasi, in Europe transformed into Kanzashi. These are original, bright, spectacular crafts that make hairpins for hair, bags, dresses.

The basis is based on the tape assembly technique according to the specified schemes of individual elements and the line of parts into the whole composition, their mounting to the hairpins, boulats, fetal base.

Bows from satin ribbons, collected with their own hands look beautiful, effectively, shadow hair color, support individual strands, fix the hairstyle.

Needlework is suitable for both adults and children. Working with tissues and ribbons of different textures is developing tactivity, feeling of taste, the ability to combine different in density and color materials.

Gates are their own hands. This is a good opportunity to replenish your own wardrobe, make a pleasant surprise to girlfriends, acquire additional earnings, as the hairpins and decorations from the ribbons are very popular and are in great demand.

Material for manufacture

In the photo of the bows and colors presented on the site, you can consider from what could make crafts. The basis serve:

  • Thin, soft fabrics. Organza, tulle, silk, which are distinguished by a clear structure, amazing overflows;
  • Satin ribbons. The material is used by different widths of 2.5 cm, 5 cm, 7.5 cm, 10 cm, if necessary for other sizes. Color range is limited only by the author's intent. Serves as the main material for making crafts;
  • Lace, narrow, wide, collected several times. Transparent lace makes beautiful bows from satin ribbons with their own hands even more attractive, colorful and elegant;
  • Decorative braid, which serves to finish bows.

Overview of satin raw materials

The finished ribbons from the atlas is one of the most affordable materials and is presented in a wide range, products from it are highlighted with a beautiful view, style and variety of forms.

Quality, inexpensive samples can be purchased in stores for sewing. In needlework, various types of tapes, braids, lace, knitted elements will be used.

Finished materials with processed edges are convenient in operation, quickly assembled into the necessary parts, require minimal costs to fix glue or threads.

The use of the thermotalkan sticky, which glues two edges, is inappropriate, as the products often have a swirling form. It is better to give preference to conventional cotton threads.

Atlas is a rather soft, smooth material with an even texture with a reflective effect. Pleasant to the touch, material requires certain skills when forming elements for bows from satin ribbons with their own hands. To work with it, pins, which fix the position, bends.

Collect the tool box

The site contains step-by-step photos. Making bows from ribbons with their own hands, which can be mastered for a couple of lessons. From the tools you will need:

  • Scissors;
  • Needles, threads of different sizes and colors. Several coils of threads of different colors will be required, since the canzashi technique is based on the simulation of jewelry with a needle and stitching elements;
  • Tweezers. Assistant who helps when working with small details;
  • Lighter. The fire prevents threads from the cuts of tapes and tissues, seating the edges. You can use matches, a burning candle, work on the open flame of the kitchen;
  • Glue-gun, glue "moment". It is used to glue the part of the composition;
  • Basis for crafts: hairpins, rubber bands, hoops, clips, scallops;
  • Decorative decorations: beads, beads, core mounts, decor on children's theme.

Basic elements

For those who wish to master the technique of creating jewelry and bows from the ribbons there are various instructions and schemes how to make Kanzashi. They are detailed, step by step, describe the process of creating petals, colors, bows. The finished decoration consists of individual elements assembled manually.

Basic include: bulk, round petal, sharp petals, double petals, volumetric leaves, flat parts, complex using multiple materials at the same time.

How to make a flat element

  • Squares are cut from the satin ribbon 2,5 cm wide.
  • Cut the desired element, leaf, petal, triangle with manicure scissors.
  • Edges to handle open fire.

How to make a bulk petal

  • The basis is the square of the tape. It is more convenient to work with a ribbon 5 cm.
  • Fold the workpiece diagonally and connect edges with glue.

Be sure to process the edges over the fire to avoid falling out the threads and deformation of the product.

How to make a complex element

  • Square billet from the ribbon to add diagonally.
  • From the resulting triangle to form a small square, bending ends.
  • Bend in half, forming a complex petal with a jumper in the middle. To glue the edges.
  • In this way, overlapping the square on the square of different colors, you can get multicolored complex petals.

How to form leaves

  • You can make a sheet in the technique of a flat element, giving the edges a wavy shape with fire.
  • Make a blank from a green ribbon 2,5 cm wide, 10 cm long.
  • Cut in half, the soldering iron is cut diagonally (you can use the exign.
  • Expand and smooth. It turned out the semblance of a cup with sharp top.

"Georgine" on the hairpin

On the site you can watch the master class video, how to make flowers-crafts with your own hands. The video demonstrates a step-by-step assembly of dahlia flowers on a rubber band.

Bows with their own hands made from ribbons quickly. At the preparation stage, collect the necessary set of tools, prepare the desktop.

For colors will need:

  • Satin ribbons of red, green 5 cm wide;
  • Felt for the base;
  • Barrette;
  • Decorative, large beads with sockets, decorative stamens;
  • Glue;
  • Scissors, ruler;
  • Candle.

Master class on making hairpins from ribbons

Step 1. Cut the blanks for petals. One flower will need 30 pcs. Large rectangles, 7 cm long, 20 pcs. Little 5 cm. Process edge.

Step 2. Make volumetric petals from blanks. Separate a rectangle on 3 parts: one third will be perpendicular, folded in half and glue. So to do with all the billets.

Step 3. Collect elements in a flower. On the felt circle, with a diameter of 4 cm, glue one large petals near the other, pressing them to the base. The second tier is formed from smaller petals. The third, fourth tiers are glued by the base to the middle, forming a lush flower.

Step 4. From the wrong side of the felt, glue the leaves by distributing them evenly in a circle.

Step 5. Decoration.

Step 6. With the help of an adhesive gun glue ready-made dahlia to the hairpin. Decoration on hair is ready.

Flowers canzashi open the amazing world of needlework.

Decorative decoration for school

We offer to make bows for school with your own hands. They look at the hair elegant, democratically, have a simple attachment on the gum, suitable for any hair color, quickly dress and securely fix the hairstyle.

The description presents the classic version of the color scheme. You can use your own ribbons.

To create an elegant hairpin, you will need:

  • White satin ribbon 5 cm wide. The total length is 140 cm, it is cut into rectangles of 10 cm;
  • Blue satin ribbon 2.5 cm wide 70 cm. Choose saturated, dark blue shades, they make the composition more contrast and well released on her hair;
  • Sewing set: needles, pins, scissors, threads, centimeter tape;
  • Decor: rhinestones, buttons for the design of the middle;
  • Candle for edge processing.

Master class with a detailed description

Step-by-step instructions, how to make bows from tapes, in an affordable form with pictures and detailed description makes it possible to assemble such a wonderful decoration for hairstyles.

Step 1. Preparation of material. Make marking tapes, cut into the details. From white, 4 rectangles are made by 10 cm, 11.5 cm, 13 cm. From blue - 3 rectangles of 22 cm.

Step 2. Formation of the base. From white segments to lay out the corner. The bottom is the longest stripes, above less and less. The angle of all is the same. Total will get six cuts.

Step 3. Make a bow. From cuts on each side, get the corners. Folded each side of three cuts in half and bend to the middle. Get a curly square. Each step is fixed by pins. Sew on the bottom corner, retreating from the edge of 2 cm. Soo, impose an arc from one edge to another. Surplus tapes cut off, process over the edge fire. Expand ribbons.

Step 4. Cut blue color folded in half, sew, combine together "Christmas tree" as shown in the photo. The middle to fix threads.

Step 5. Fold together blue and white bows, sew, arrange the middle. As a central part, we use a decorative button. Send a gum. School bow ready.

Stock Foto Bentlets from satin ribbons do it yourself

Satin tape is a very interesting and fairly universal material for creativity! With it, it creates a lot of crafts. In particular - bows from satin ribbons with their own hands! Lush, bright, different shapes and sizes, they apply not only to decorate boxes with gifts, but also for decorating rims, dressings, hairpins and rubber bands. In today's lesson, we will look at a few completely different, but, of course, beautiful options for the manufacture of bows for every taste! 😉

Perfect lush bow in 15 minutes

Perfect magnificent bow

Master Class

Cut off the four pieces of atlas: the two largest - the same length, one more - smaller and one more very short (we use it as a jumper).

We sew or glue with each other short sides first with one long, and then one middle strip. It turns out two rings as in the photo below:

We put them in half the seams down, put one more small detail. Stitch or glue in the center.

Slightly suggest a bow in the center:

The remaining short piece we bring to the long sides inside until the middle, like this:

Gently turning the jumper bow with the bottom of the second long strip inserted:

Stitch or glue the jumper.

So that the bow watched is neat, cut off the bottom of the "tails" of the painter. In the case of a satin ribbon, you can carefully treat sections with a lighter.

Bow ready! If you wish to make it even more lush, make three or even four rings, most importantly - so that every next thing is slightly less than the previous one;)

How to tie a bow from the satin ribbon on the fingers

Master Class

So, lay out the ribbon on the fingers of the left hand, as shown in the photo, and hold it with a big finger.

Twice wrap a satin ribbon around the fingers, like this:

We stretch the end of the ribbon between the middle and index fingers:

Big fingers continue to keep the end.

Next, I pull the end of the tape on yourself and apply under the loop:

Correctly pull and tie a nodule. Remove the bow from the fingers.

It remains to cut the masts of the ends and pour them with a lighter, so as not to disengage.

Three satin ribbons

For work, we will need three satin ribbons of different widths (5 cm, 2.5 cm and 0.5 cm), scissors, needle and adhesive gun. The edges are fired with a candle or lighter.

Master Class

Cut two tapes of the same length. We process edges with fire, so that the material does not lure. We put a wide ribbon in half, we plan the middle. Deploy back. We put on the table a wide ribbon, top with a narrower:

Next, we need to flip ribbons, fold their edges inward to the middle line, and flash the stitches.

We tighten the thread, forming folds, and tie a nodule.

Women hide a membrane from a narrow strip - just turn around it the bottleneck and fasten the adhesive gun or threads.

Bow ready!

Lush bows of satin ribbons do it yourself

For work prepare:

  • white satin ribbon 5 cm wide - 138 cm;
  • Dark blue satin ribbon 3 cm wide - 69 cm;
  • silver strip 1 cm wide - 10 cm;
  • line;
  • pins;
  • candle or lighter;
  • threads;
  • needle;
  • Elastic band.

Step-by-step instruction

Stage First

To begin with, we need to cut a white satin ribbon: 4 segments by 10, 11.5 and 13 cm.

Next, cut blue - three pieces of 22-23 cm.

A brilliant ribbon 10 cm long leaves untouched.

Now go directly to the creation of a bow - for this we will fold and fix the ribbons.

We lay out of two white segments of 13 cm direct angle, overlapping one tape to another, as shown in the photo:

On top of this corner, we put two ribbons with a length of 11.5 cm each. As a result, it will turn out such a "Christmas tree":

On top of these strips, we still have two more, but 10 cm long for 10 cm. I spoke our Christmas tree pins diagonally.

The remaining strips we fold in the same way, separately from just collected.

Now bend the corners of the tapes, as shown in the photo:

We fold the corners forward, along the first pins. We have a straight corner.

We do the same on the opposite side:

Then bend forward to the bottom corner and we spawned a pin.

From the lower angle, we measure 2.5 cm and celebrate this segment, again we apply a circle:

Stage two

We carry out a neat aims for just applied line and remove the pins. No need to cut off!

Cut off the excess along the stitches, retreating from them a few millimeters.

Gently we fall down the cut.

Then we tighten his thread and get some kind of bud :)

The second half of the bow is made similarly.

Two halves fasten threads.

White part of the bow is ready:

Now we will deal with color (in our case - blue) ribbon. We process open sections.

Having folded each segment in half, wealthing the middle and deploy. We fold the segments of the segment to the middle of the falsestone in several millimeters. Fix pin.

The next thing we need to do is to lay down the blanks on the other, like this:

We sew their contemporary wide stitches:

And now neatly tighten. Bit Bantian is also ready.

We put the white part of the bow on the blue:

We associate their thread, as shown in the photo. After that, fix the string and cut off.

Stage Third

Now we need to beautifully attach a bow to a rubber. To do this, we take a dual thread and with the help of the needle fasten a bow on the top of the rubber, stitching and priming it.

It is much faster than you can attach a bow with a thermoclaus, however, the gums are quickly stretched, and then remove the glued bow to replace the gum will be much more complicated.

Wrap a bug with a rubber band in the center of a silver ribbon, hiding the seams:

And fix the edge by threads.

The middle can also be decorated with beads, beads or sewing rhinestones.

Bow for a little fashionista is ready!

Large bow of satin ribbons in the form of a flower

For work prepare:

  • Wide satin tape (for this bow used 8 cm width, it is possible less) -150 cm;
  • scissors;
  • threads;
  • needle;
  • beads or rhinestones;
  • Brook-brook for the core;
  • felt;
  • Adhesive pistol.

Master Class

Option first

We fold a long tape into the harmonica and tie in the center of the thread in the tone.

Soak each loop and gently straighten. Between loops we sew large rhinestones or beads.

Option two

More complicated, but more inactive. 🙂

Cut the ribbon to 29 identical segments. It is advisable to take a satin tape with a rigid edging - so the bow will be better to keep the form!

Next, take the segment, fold it twice, overlapping one edge of the tape to another. Stitch or glue edges. We repeat the same with the remaining ribbons.

Next, sew the details in four flower 9, 8, 7 and 5 petals.

Cut from a dense felt a circle.

We apply glue and alternately glue the flowers, starting from the largest and ending with the smallest.

The middle decorate the brother or beads and beads.

Luxurious lush bow do it yourself

For work prepare:

  • Satin tape (the more you need a bow, the longer and wider than the tape);
  • Clocks-crocodiles, paper clips or paper clips;
  • thread;
  • needle;
  • glue pistol;
  • the foundation for the hairpin;
  • cardboard;
  • pencil;
  • scissors;
  • Candle for cutting cuts.

Master Class

First we make a template - cut the square from the cardboard. More square - more bow. In the center cut out a long narrow recess (width of about 5 mm).

We have a satin ribbon, as shown in the photo, fix the clip and cut the end, so that it is a little longer the edge of the template.

Wrap a ribbon, as shown in the photo, and fix it. After completing three turns, cut the tip.

We take a needle with a thread and with a recess in the template we derive a needle. We flash all three turns of the seam "forward needle" and remove the ribbon from the template.

We assign a bow in the center.

We drag on the thread so that you can fix the base for the nipple below it. If necessary, we perform some more neat locking stitches.

We take a narrow tape, turn around the bow in the center and with the help of hot glue fix on the back side, simultaneously masking the locking seam under it.

Bow ready!

Bright two-tone bow from satin ribbons

For work prepare:

  • satin tape of two colors (4 cm);
  • scissors;
  • threads;
  • needle;
  • glue pistol;
  • line;
  • Candle.

Master Class

Cut the tape with a length of 20 cm - 2 +2.

We fold the parts by connecting the exhaust to the wrongness:

We rock stripes in half and dragging the edges in opposite sides before getting a straight angle. Then we connect together and move the ribbon almost to the edge of the lower segment:

Two details:

Next, you need to connect corners with the edges of the parts by folding them in half:

We flash the details on the edge and tighten the thread.

Sut off another piece of tape length 7 cm. Wrap a ribbon middle of a bow.

Ready!

Bowls of Kanzashi from satin ribbons

For work, prepare the same materials as for the previous bow.

Master Class

Cut the tape with a length of 20 cm - 4 + 4.

We connect two multicolored with an inside. Crawling the angles: one up, the other - down, changing the color of the upper ribbon.

We fold twice as in the photo:

Again twice:

We flash the edge.

Tighten the thread, we form a bow and fix it.

The middle is wrapped with a tape of 10 cm and fasten with glue.

Bow ready!

https://youtu.be/pu8jkhc4zh8.

Lush two-color bows from ribbons with their own hands

For work, prepare the same materials as for the previous bow.

Master Class

Cut two white tapes for 20 cm.

Four purple tapes for 20 cm.

We plan the middle of the purple segment and fold the ribbon into the triangle. I turn over.

Watch the edges, folding free edges in half. I turn over.

We connect the top and bottom, like this:

We perform four of the same details.

The same makes the same with white ribbons.

We flash the edges of two purple blanks, tighten, fix the thread.

Next - two white.

We connect the white and purple bow, putting one to another:

A lilac ribbon we put in the tube and tie into the node. Rates from the nodal to three centimeters, cut off the ribbon.

We glue the rubber band and disguise the middle ribbon with a nodule.

Bows taken by their own hands are ready!

Satin tape bows 2.5 cm: Video master class

That's all! Now you know how to make a bow from the satin ribbon with your own hands. Share with us photos of your bows in the comments! 😉

Main photo

Without anything can not do any girl? Without bows! After all, they make it the most different: a cute, funny, serious, young and adult. Bows are put on when they make a hairstyle in a kindergarten and school, for holidays or just for every day. They decorate not only hair, but also handbags, phone covers and even clothes! This is an excellent gift to any young fashionista.

And if he is made with his own hands, it will definitely get charming and so good anyone else! Handmade is always in price. Do you want to learn your hands to create real little masterpieces? Then our material is for you.

Of course, very beloved and unusually popular are satin. This is understandable: they have the brightest colors, besides, they are on the pocket of any needlewoman. But you can also use the rep companion tape, satin, brocked, fabric, silk, or velvet. Bows of them are no less interesting and original. In addition, it is a great way to show fantasy! Fatin, organza and the most different fabric - do not believe, these are also materials for your creativity. Turn on the fantasy and create with us.

Bow on hands from satin ribbon

Satin ribbons are the most favorite and affordable material. And we offer to start with them. If you are a novice in this matter, first you should learn to tie a beautiful bow from the finished ribbon on your hands. Make it quite easy.

This is a very simple tying technique. And we will help you: carefully follow this step-by-step video. A little time, attention, and you will definitely work out!

How to starch the satin ribbon?

To close the satin ribbon, you will need starch and water.

The proportions are: for one art. Spoon Starch Take one glass of water. First, dissolve starch about a third of a cup of cold water. Put the remaining water to bask on the stove. As soon as it boils, a very thin ridge pour dissolved starch into it. Constantly stirring, cook for about 5 minutes.

Remove from the fire, cool slightly and put in a mixture with a tape. Keep 20 minutes. Then squeeze, dry and join the paper.

Now you can make a bow from the ribbon, It will be smashed less and keep the form!

Beautifully tying a small bow on the fingers

If you do not know how to tie a bow from the tape on your fingers, these photos will help you with this. There is nothing complicated here too. Of course, you first stand a little stretch, but then you will do it with ease.

On the fingers a mini bow

This cute little bow can be decorated with hairstyles, clothes or handbags. In addition, this is the fastest way to beautifully tie a bow from the satin ribbon. On our pictures you can see more and more detail.

Double mini banta tying scheme on fork

Charming small bowls from satin ribbons can be tied in a very unusual way - with the help of the real table appliance - forks! Do not be surprised. These baby bows will decorate a funny postcard, hairstyle or clothes of pupae, rubberry or hairpin for little girls.

The master class in their manufacture is presented on our photos.

Double mini bug on fork photo MK

A very tiny bow can be tied even on a comb!

Classic School Booth from Kapron Tape

The classic will always be in fashion. It is appropriate anyway. The same applies to wide bows, especially school. What kind of hairstyle is associated with the holiday of first-graders on September 1, the last call or graduation? Right! With white big bows on your head!

We suggest you do just such. It is very elegant and volumetric. Perfectly decorate tails and pigtails. About how to make it stages, read below in our material.

White bows balls

Before proceeding with work, prepare not too short segment of the kapron tape. The optimal length is about one meter. And the width should be at least ten centimeters.

Step 1. To begin with, our ribbon you need to take, bend it very carefully in half. And then free edges be sure to be made by pins. Step 2. The edges that are on the sides, you need to fall as a match or lighter. Do it quickly, so as not to burn all the product. Then scroll these edges too with each other. Step 3. To this edge, where you sewed two ends, see any hair band chosen. Step 4. Now keep sturdy threads along the fold line. Step 5. Remove the pins and accurately roll up and pull the tape. Step 6. . Manually form a magnificent bow and once again squeak it with a needle with a thread.

Interestingly, the classic method of tying a bowl is called yet French . And therefore, dear readers, do not look for a French bow, this is our, familiar and beloved - classic!

Balls from organza

Organza - gentle and air material. From it you can make magnificent festive and casual decorations on the hairpin and rubber band, put on the rod. They are perfect for girls, girls of different ages.

To create it, it will take quite a bit: a meter ribbon 2,5-3 centimeter width, threads, a needle, a glue gun, a rubber, a piece of felt of the ribbon color. Detailed MK watch for free in this video.

Very smartest and festively watched huge balls balls from the fate. In order to make such a gorgeous ornament, you will need two segments of a 1.5 m with a size of 1.5 m per 15 cm. You will get a big magnificent bow, which will be appropriate even at the wedding celebration!

From two tapes width 5 cm

This is one of the simplest two-color bows that even a beginner master can quickly do. The process, of course, is unprecedented, will require time and patience. But the result will be very pleased.

white-beige

* Photo MK: Aljona Batistik

So what do we need?

instruments

  • Purchased ribbons. They must be two species - different colors and widths, length - the same. For example, you can take white and beige colors.

    The length of the tapes is 47 cm. And the width of one - 4.5 cm, in the other - 5 cm. You still need a narrow segment of the tape to the tone of your bow. The width of about half a centimeter, 10-12 cm long.

  • Leaf. This is a very important item. It can be made of a dense piece of cardboard. Dimensions: Height - 20 cm, and width - 11 cm. It requires exactly in the middle to cut the hole with a width of approximately 0.5-1 cm: starting on top and not reaching the end 3-4 cm. Laman for a bowl
  • Beautiful middle for a bow on your taste.
  • Threads, needle, scissors, glue "moment" (can be glue gun), lighter.

Now proceed to the process.

Stage 1. . Wrap the first ribbon slightly macasok around the pattern. On the front side there should be three ribbons, on the wrong one - two. We fasten them with clips.

step 1

Stage 2. . We take a thread with a needle and gently flashing the ribbons through the hole in the lecture. Now we remove our billet, do it very carefully.

Step 2.

Stage 3. . Next there is nothing complicated: just tighten the thread and form the first bow. I fix it again with a thread and needle.

Step 3.

Stage 4. . Exactly the same manipulations are carried out with the second bows. Send to the second - rubber band.

Step 4.

Stage 5. . We take two bow and sew them with each other. It is clear that the lower should be with a rubber band.

Stitching

Stage 6. . And now it's time to remember about our thin ribbon. It needs to wrap two bows several times to braid it once again. Be sure to make ends.

Step 6.

Stage 7. . We glue the selected middle to a bow. Now you can braid pigtails and put on bright hair bows taken by us.

We decorate the middle

It is very important to correctly choose the correct combinations of colors for multicolor bows. Only in this case the result will be very pleased, and the product will look harmoniously.

To help you - our color circle (combination of colors) >>

3 photos MK

Multilayer option, see the assembly scheme:

Multi-layered

School option:

Multi-layered

Third idea:

Rose

Bow Mickey from Fatina and Rec

This amazingly cute bowl will charm any young princess. In it, it will be similar to the American cartoon hero Mickey Maus. The product is very unusual. Reminds a small bow with a skirt, only inverted.

Bant Mickey

You need to cook:

  • A piece of tulle about 3 m long, choose the width to your taste: if you want a big bow - choose from 10 cm;
  • Two pink bows in white polka dots. You can make them yourself;
  • Two clamps or two rubberbies;
  • Glue gun and scissors.

Prepare

Step 1. Cut the tape tape half. Take one part and wrap it on your hand. Remove from the hand.

Wash

Step 2. Cut a piece of Tulle about 5 cm and tie out a blank removed from the hands right in the center.

Photo

Step 3. Cut the tulle along the edges of the bow. Relieve and flip.

Flues of the middle

Step 4. With the help of adhesive guns, glue the billet from the tulle to the climb or rubber band.

Stick to the barn

Step 5. To the bottom of the workpiece, glue a pink bow. Decorate your tails or bundle.

TOTAL

If you stick a bow with tails, it will also look very cute:

Option

From the reps tape and lace

If you have a schoolgirl, which is very capricious in choosing hair jewelry, then give her bow. And be sure - she, surely, will remain satisfied!

for school

* Photo MK: Maria goodies

Prepare to start:

  • Two reps tapes: One of them should be blue, and the other with a bright print - in our case it is a white ribbon in small blue polka dots. But you can choose your colors. The width of the tape is small - only 2.5 cm, and the length is 21 cm;
  • White lace: You also need it a bit - 43 cm and width - 4 cm. It will need to be cut into two equal parts;
  • White satin tape: its width is 2.5 cm, and the length is 43 cm. It will also need to be cut into two identical parts later;
  • Beautiful middle for a bow;
  • rubber;
  • Special glue "moment" (you can take a glue gun);
  • Threads and needle.

Now let's start sewing our bow.

Stage 1. . Take the reps' ribbons. How to remember, you have two. Now everyone needs to be very neatly folded in half. Films need to be carefully sold to be visible.

one

Stage 2. . In the hands take one of our ribbon. And one edge should be wrapped in a cute to the middle split. Perhaps the first time it will not work, but you work out. End fasten in the middle of our tape. Similarly, do with another end. What should we get? And these are two "kulechka" on both sides.

bend

Stage 3. . Then make the same with another ribbon. Each billet we flash the surrender to a solid thread.

Firm

Stage 4. Two blanks need to put each other, preferably tight, and then flash them together. If you are all done correctly, you will lie in the form of a butterfly.

Butterfly

Stage 5. And now you will prepare our white satin ribbons and openwork lace. We act like this: first put the ribbon, we put our lace on it. To glue them, prepare a lighter. Now very neatly along the edges spend fire. The edges are lightly cut and glued. Similarly, we make the second workpiece. We are tightened with a dense thread in the middle.

Opali

Stage 6. . Send to the billet from lace and tape gum. Remember that the rubber band is best selected in the tone of the bow.

Stitch together

Stage 7. We collect our beautiful fluffy bow, glue all the parts with each other, including the middle.

glue middle

From braid and bugs

Such a bowl is perfect for the rim. You can also decorate a small clinch. Hairstyle will look cute and unusual.

From Tape

So, we will need:

  • 1-2 meters Tesma, choose the color according to your desire;
  • a small piece of felt tissue (you can take a felt or any other soft tissue);
  • Beautiful button;
  • Hair Climber;
  • glue gun.

Now proceed to the process itself.

Step 1. Cut two felt mug with a diameter of about 5-6 cm. We take one circle and sew the braid to it.

like this

The principle of this: starting from the outer edge in a circle, gradually fill the entire circle. Each new turn braid must slightly cover the previous one. As a result, you must get a neat and tightly filled circle with rushes.

round

Step 2. We draw up a middle: Send to a mug with a braid button.

Butt

Step 4. We take the second circle, do neat incision. Insert the hair pressure closer.

Zavigin

Step 5. Printe the two parts to each other.

Photo

We can bind the braid - it will turn out more original! And from the colon bows of the bow will turn out more.

Two-color original flower

Of course, you will have to work yourself on your own, but you will definitely believe that no one will definitely be such an original decoration!

Original assembly

Prepare to start:

  • Reppetant tape of two colors, each color take no more than 60 cm;
  • Beautiful middle;
  • Threads and needle.

We present you a step-by-step master class with a detailed description.

Stage 1. . Each tape can be cut for 6 pieces of 10 cm.

one

Stage 2. We start sewing them with each other. We take the ribbon of the same color (in the photo of the white), put on it to the ribbon of another color (green) so that she covered her half. We sew them at the top.

2.

Stage 3. . Take the white tape and put it under the green, which has already sewn. Sust again all at the top.

3.

Stage 4. Repeat the drawing: Take the green again, the white, the green again, and so on.

four

As a result, you should get like this: top of the ribbon of green, under them - white.

five

Stage 5. . Now tightly sew the prepared workpiece at the top, strongly pulling the thread. So that the middle is not broken, make a few more stitches. You have to get a blank resembling the sun: the rays should be alternating in color.

pull

Stage 6. Turn your blank. Bend white rays and suck on the needle. Do these manipulations with all white rays. Sing the ends to the middle.

Stage 7. Now take a green ray and thread it through the neighbor white as in the photo. Sust in the middle.

Green ends

Also do with the rest of green rays.

hereinafter the same

Step 8. Turn over the resulting workpiece and attach a round middle.

Ready

The resulting flower can be glued to the gum. It is an excellent handmade decoration and for a handbag, and as a decor for a cover. And from it you can make a wonderful interesting brooch.

And in this article, read how to make a hairpin with your own hands >>

Bow on the template

This is one simplest bows. It is made according to the template that is cut in advance.

Simple option

* Photo MK: Met (ettibrasletti)

You will need:

  • Ribbon (rep or satin). You can take a width - a small bow is obtained from a ribbon to 2 cm wide. Length - depending on your stencils;
  • Two seminal star stencil, one of them is less than half. In the middle of the stencil you need to cut a hole in order to be tape. To print our pattern - click on the picture, it will increase and you can download. leaf

    In this MK, the stars were used with a diameter of 9 cm and 6 cm.

  • Durable threads, needle, sharp scissors, lighter or matches, glue (best adhesive gun).

Now we will tell you, dear readers, step by step, how to make a bow from the ribbon with your own hands using a stencil. By the way, it is perfect for beginner masters.

Step 1 . Out of the edge of our tape and very carefully do it in the center hole. Now you need to wrap our ribbon around the first beam. And to bring it back to the center. You have to get a petal.

Wrong on the template

Step 2. . In the same way, you turn around all our rays of the template.

continue

Step 3. . Now you need to flash our billet in the center.

strike

Node hide. Do not forget to fall out the cut end of the ribbon.

cut

Step 4. Remove the stencil. Make similarly to another such workpiece and one on a small pattern. As a result, you should have two large flower and one small.

Repeat

Step 5. We make a middle: Cut a small piece of ribbon (about 12 cm), we pour it on both sides by a lighter, we collect and tighten the tight thread with a needle.

Step 6. . We collect and glue all the workpieces: first two large, then one small and middle. Send them to rubber bands, clamp or hairpin.

end

Flat bowl of ribbons of different widths

Such a cute bow is very and very easy - you will need 20 minutes, no more. It can be attached to the rim or rubberry, decorate them a dress and even shoes.

Brown design

* Photo MK: knopka.baby

So, prepare:

  • Three types of rep and tape: thick one-photon tape 2.5 cm wide - length 40 cm; A narrow one-photon tape with a width of 0.7 mm - length 33 cm; Thick tape with a 2.5 cm wide - length 22 cm;
  • Beautiful decoration for the middle (it can be the cabochon, bright rhinestones or button - choose to your taste);
  • Threads, needle, scissors, glue.

We start doing our bow.

Step 1 . We take a one-photon thick ribbon, fold it in half and cut.

Popolam

At the ribbons we plan a middle and every end we will be adjusted to it on the one hand. To make it convenient for you, fasten them with a pin in the center. Exactly the same manipulations are carried out with the second ribbon.

fold

Step 2. . We fold the two obtained billets with each other slightly macas. You must have a billet, similar to a butterfly.

fold on each other

Step 3. . To put on the resulting workpiece, we first our adeed tape, and then it is already narrow on it (cut off a piece of 23 cm long), the ends bend to the wrong one.

Crawling to Incain

Step 4. . The remaining piece of the tight ribbon ribbon is perpendicular to the bowl of bow butterfly. Then we tighten the bow, cut off the unnecessary pieces and stitch.

Step 5. . Now it's time to decorate the middle. It can be seed or glued.

Outcome

If you add such a bow with long ribbons that attach a slightly at an angle to the middle, you will get a so-called type of bow - bow-tie.

"Sandy with pomposhki" on the hairpin

These bows-candies for hair are more suitable for our cute babies.

Pomposhka

You will need:

  • a small piece of tulle 12.5 cm wide and a length of 21 cm;
  • very small piece of silver ribbon (no more than 5 cm);
  • Color pumps with a diameter of no more than 0.5 cm - about 70 pieces;
  • Adhesive pistol. That's all!

Stage 1. . On a piece of tulle evenly on both sides of the center for dispense of pumps.

We distribute pomposhki

Stage 2. . Lower edge Overview on 1/3. The edge must close the pomponiki. Similarly, over the top edge on 1/3. He must also go to the pumps.

Top

Stage 3. . Over the edges on the left and right so that the pomponices are distributed on both sides of the center evenly.

Survision from the side

Stage 4. Drip glue droplet and squeeze the center so that you have a bow.

Squeeze, glue

Stage 5. . Stick a piece of silver (pary) tape in the center.

Middle

Stage 6. Stick a bow on the hairpin. Your child will be happy!

glue to the hairpin

Lessons and master classes for inspiration

We present you a small collection of ideas for inspiration. You can gradually replenish it.

Pink tenderness from lace and satin

This sweet and charming bowl with lace is suitable for festive outfits, and for every day. You will need quite a bit: a piece of satin and lace tape, beads and a little bit of free time.

White-blue Kanzashi

School style option. Make such a miracle for your student, and it will be unique. If you make a bantum from a velvet tape, that is, the blue satin replaced to velvet, you will get no less interesting option!

Three ways in one video "How to make a butterfly from the ribbon" from Svetlana Zolotareva

If you are very novice, we advise you to watch this video - all stages are shown in it very simple and understandable.

Unusual way to fold the ribbed ribbon

There is nothing complicated, but the result simply admires!

Gentle bows from the reps tape

This lush bright bows is perfectly suitable not only for babies, but also schoolgirls. You will have to work a little over them. See the master class on making in this video.

Luxurious delight

Such bows for real princesses and queens! New design just luxurious.

Baby on the first tails:

  • Master class from Alena Khoroshilova. Everything is very simple: fold the harmonic ribbon and go. You will have a real funny multi-layer children's bow. For details, see the video:
  • Master class from Tatiana Marchukova. Adorable cute godbades for baby girls See online in this video:

Testing technique Bantia

In Soviet times, all girls ran to school with such bows! The tapes were simply walked into the pigtails, they did "lamb". Now not all moms know how they did it before. In this video, it is described in detail about how to have a bows in the braid.

Before watching it, make tapes. If the hair is slightly lower than the belt - their length should be at least 2.5 m, if higher - enough 1.5-2 m.

How easy and beautifully tie a bow of ribbon

Bow of tapes - accessory, invariably present around us not only during the solemn events, but also in ordinary life. There is a lot of different bows on sale, but with your own hands made of amazingly beautiful things will cost many times cheaper, and it will look original, not beaten.

The content of the article

Can you kill with crochet? Publish work on Kru4ok.ru.

Bow of tape: where applies

Mom girls know exactly that without a variety of diverse bows it is impossible to send a daughter even to kindergarten, not to mention the matinee or other festive action. And the most unusual, beautiful, bright accessory from the tapes should decorate the hair, girl's clothes on her birthday.

How easy and beautifully tie a bow of ribbon

The bow of the tape is also appropriate in the following situations:

  • For the manufacture of hairpins, rubber bands;
  • when finishing dresses, blouses;
  • For belt design;
  • When the gift is decorated, etc.

Depending on the purpose and idea, the bow can be of different sizes and species: flat or lush, simple or multi-layered, using finishing shoelaces, etc. The tape itself can be any - a motley, monophonic, with a textured surface, smooth, with finishing stripes or without.

What materials are used for the manufacture of bows

The tape does not necessarily apply a wide, elegant accessory also leaves the narrow strip, turning into the hands of the craftsmen into the womb flower. Materials are used as tape material:

  • atlas;
  • Natural or artificial silk;
  • Capron;
  • Nylon and other fabrics.

The chic bow can be made of polka dot fabric and even in a cell. A special place in the manufacture of decoration on the hair or for the design of gifts is occupied by the color of the ribbon. Before you decide on the dominant bowl of the bow, you should consider both the purpose of the event and the color of all the items of clothing, shoes, as well as other accessories.

Permissible in the manufacture of a bow from the tape a combination of several colors, and not only different tones of the main direction, but also contrasting colors.

From the courage and latitude of fancy, the craftsmen depends on how interesting, the exclusive bow will succeed.

Whatever technicians and tools, the materials did not use the master, making an accessory from the tape, the result will always be delightful in identity and uniqueness.

Bow of a tape of two colors, master - class!

Bow of a tape of two colors, master - class!

We need a tape of two colors width 2-2.5 cm and 60 cm long, clothespins, a pattern of cardboard and a needle with a thread.

Template as in the photo on the left:

Template as in the photo on the left:

We fold two ribbons with an invalid side to each other and a lighter we fall around the edges:

Bow of a tape of two colors, master - class!

We begin to fold the ribbon as in the photo and fasten the clothespins on the template:

Bow of a tape of two colors, master - class! Bow of a tape of two colors, master - class!

When the tape is decomposed and fixed, we flash the thread across the bow remove the tape from the template and collect it on the thread, straightening the bow:

It turns out such a bow, the middle time is copied to the thread several times and you can sew on clothes or glue for a gift:

Bow of a tape of two colors, master - class!

Little bow from the reps tape, master - class!

To create a bow, we will need a reps tape with a width of 1.5 and 0.5 cm, a length of 60-70 cm, a thread with a needle and a lighter.

Fold a loop from the tape, as shown in photo 1:

Little bow from the reps tape, master - class!

Fold the loop from the center of the top down to the base and secure the pin:

Free tips fold the cross on the cross and secure the needle.

Little bow from the reps tape, master - class!

The bow is essentially ready, now it needs to be filadied and strung.

Little bow from the reps tape, master - class!

The stitched place is intercepting the thin reps ribbon and tie a node from behind:

Little bow from the reps tape, master - class!

It turns out a beautiful bow, just do not forget to melt the tips tips on the lighter.

Little bow from the reps tape, master - class!

Rosette from satin ribbon, master class!

Here we were useful to the second pattern. We make a rose from the satin ribbon on the template, although you can do on your fingers.

2 cm width tape and a length of 80 cm to 2 m, depends on the number of petals and pomp future flower. Mix 11-15 times a tape on the template:

Rosette from satin ribbon, master class!

Remove from the tape template and make the node free ends:

Rosette from satin ribbon, master class!

Fend from above in turns every ring is right, then left at the same time turning the tape on the front side:

Rosette from satin ribbon, master class!

Total will get several petals, and leave the last ring in the middle of the flower:

Rosette from satin ribbon, master class!

Rose from satin ribbon is simple and bulky:

Rosette from satin ribbon, master class!

How to make a lush bow of satin ribbon

How to make a lush bow from satin ribbon:

The diameter of the finished bows is 14 cm. (If you want to reduce the size of the bows, boldly reduce all the stated dimensions by 2-3 cm.

We need:

  • Tape 50 mm width (5 cm) 6 segments of 14 cm
  • 25 mm width ribbon (2, 5 cm) 6 segments of 10.5 cm
  • Thin silver tape 3 mm about 6 segments of 15 cm and 6 segments of 8 cm
  • Circle of felt with a diameter of 5.5 cm
  • Heart or flower for the middle
  • Thread, needle, scissors, lighter
  • Adhesive gun or glue-moment transparent, or titanium glue
  • Elastic or crocodile for fastening.

An important rule! Ribbons Immediately after cutting, quit around the edges so that they do not fall !!!

Step-by-step master - class Look at the link

Volumetric Booth from Gift Tape For 3 Minutes

Volumetric Booth from Gift Tape For 3 Minutes

We will need:

  • Paper tape (any width, but more 1cm)
  • Thin paper tape (0.5 cm)
  • scissors

Step-by-step master - class Look at the link

Little Bow for Jewelry

Little Bow for Jewelry

Today I want to share with you the simplest way to tie a bow, for the manufacture of 1 bantas requires exactly 1 minute. America I certainly do not open, but I am sure someone my master class will simplify life and free some time on other important things. The master class is designed for beginner needlewomen.

To work, we need a dense tape with a width of 1.5 cm. And the tape cord in the main color (I have golden).

We pay your fingers the main ribbon flashes. Remove the loop, intercepting her fingers in the center. Then we make a double turn at exactly in the center of the future bow tape-cord.

Little bow of ribbon do it yourself

Cut the cord. I turn over the bow facial side up, cutting a ribbon forming beautiful tails. It remains only to straighten a bow. MK source

Simple and beautiful satin ribbon bow

Simple and beautiful satin ribbon bow

  1. Prepare scissors.
  2. For one bow, we will need two types of ribbons, I have a beige color (4.5 cm wide and 47 cm long) and white (5 cm wide, and 47 cm long). You can use one tape on both tiers.
  3. We also need a 0.6 cm tape segment with a length of 12 cm,
  4. Laman (my milestone has a height of 20 cm, and 10.5 cm width). The leaflers are smoothly divided into the center, in order to flash through our workpiece.
  5. Needle with thread.
  6. Glue to secure the middle (I use the polymer "dragon").
  7. Lighter for melting edge tapes.
  8. Mains for our product.

Here is our set of all necessary.

Step-by-step master class See by reference

Little Bow for Gift from Satin Ribbon

Little Bow for Gift from Satin Ribbon

For a bow, I used a satin ribbon, 40 cm. It is quite enough. On both sides, the edges have fallen a lighter and you can start tie.

Step-by-step instruction

Bow of satin and rep and ribbons

Bow of satin and rep and ribbons

I want to introduce you another master class on the manufacture of a bow of ribbons. This time we will decorate the clip-clamp. To work, you will need:

  1. 2.5 cm wide ribbon;
  2. Ribbon 1,5 cm wide;
  3. 1 cm width ribbon;
  4. Clip-clip Long 5 cm;
  5. threads;
  6. scissors;
  7. lighter;
  8. Glue or adhesive gun.

For the first layer of a bow, take 2 cuts of a wide tape with a length of 14 cm each and 2 segments of a narrow ribbon 14.5 cm length each. To the ends of the tapes do not flip, I melt them with a lighter.

Wizard-Class See by reference

Making a large satin ribbon bow

We will need a ribbon 3 cm wide and scissors.

Make out of the tape the first loop, as in photo 1:

In the left hand, make a similar loop:

Crossbet the loops from the ribbon and the top loop stretch through the hole between the hinges, so that the node touches:

Tighten the node, turn the bow so that the hinges are from above, and the long tips from the bottom.

Pulling in turn Free ends of the tape Adjust the loop of the bow: Make them more or less:

Bow ready. Now we will deal with free tips. Fold them in half and cut at an angle of 45 degrees:

If necessary, fall the tips with a lighter:

Video lesson how to properly tie a bow of tape for a gift

See how to properly tie the box with ribbon and tie a simple classic french bow.

Here should be booted video, wait or refresh the page.

How to make a magnificent bow of transparent tape

Here should be booted video, wait or refresh the page.

Magnificent gift bow from ribbon, easy way

Here should be booted video, wait or refresh the page.

Unusual gift bow from ribbons with their own hands

We will need a wide satin ribbon, double-sided flexible tape and scissors.

Here should be booted video, wait or refresh the page.


Добавить комментарий