Статьи

How in the Word insert text to the picture - Step-by-step instructions

To insert text in the picture, usually apply special graphics editors. However, you can do without special means and do everything you need in the Word. This will be discussed in this article.

Simple inscription help paste text in the picture

This is the easiest way to insert text in the picture using Word. It is carried out using the "Inscription" function. It is quite easy to use it. Need:

  1. Open on the top panel "Insert" category.
  2. Click on "inscription".
  3. Select "Simple inscription". inscription
  4. Enter the desired text in the new frame.
  5. Move the text block to the image.

An opaque block is created standard, that is, all free space will be white. To remove such a background, you should click on the text, the top panel will switch to the category "Format", and then click on the "Filling of the Figure" and choose "no fill". No fill

Also, the text block is created with a frame. It can also be disabled. To do this, you must click on the block again, on the top panel, select the "outline of the figure" and install "no contour". No contour

The text created by this method can be edited, as any other, namely, change the font and size, color and other parameters. Thus, you can adjust the shadows, reflection, backlight, etc. All these features are available on the "Format" tab. Format tab

Special styles are available for such a text block. They can be used on the Contour tab in the appropriate section.

How to insert text in the picture: Through text

Another way to add text to the picture is to use the text flow function. Thus, the image will not block the usual text if they are superimposed on each other. Make it pretty simple:

  1. Right-click on the picture.
  2. In the context menu that appears, select "Flashing text", and then "text". Flooding text
  3. Move the image to the pre-created text.

This method is best suited when it is necessary to edit a large picture that occupies the entire space of the sheet.

Insert text in the picture: WordArt object

This method is worth choosing when you need to add text to the image immediately without frame and background. This follows:

  1. Go to the "Insert" tab in the top panel.
  2. Click on "Add a WordArt object" (icon with a rotated letter "A") in the "Text" category. text
  3. Select one of the harvested styles. Choosing style
  4. Enter text.
  5. Move the block to the picture.

Without the use of specials, you can insert a simple text to the picture. This requires only Word, and special knowledge and skills of working with graphic programs are not required. Text editor allows you to make text. These funds are enough for many simple tasks.

What does the usual user makes when in document Word need to put the text in the image? That's right, it applies different graphic editors from standard Paint to powerful Photoshop, and time spent time and the result may not please. But there are several options inserts to the text of the text in the Word, which will look original, in the Word itself without resorting to the use of other programs.

The given instruction will introduce the techniques to create any inscriptions in the image.

Method number 1: Text block

If you need to make an illustration of the usual explanatory inscription, this method is most appropriate. The feature of the object is that it can be placed anywhere.

So, suppose that the document already presents the desired drawing and it remains only to place several offers or list. How to do it? For each release of the text editor, the scheme is different, but slightly.

  • Word 2007. Open the Insert tab by pressing the appropriate point on the panel. Now find the "Text" block in the tape, click the "Inscription" button.
  • Word 2010, 2013, 2016. All actions are performed in the same panel and group, but the names of the ribbon elements are slightly others. Locate the "Text Field" button. After this, the menu will unfold with a set of ready templates. There, click "Simple Inscription" (this will be the first example in the window). As a result, a frame with a sample text will appear on the sheet. Next, drag the resulting object to the picture. To do this, hover over the framing, the arrow will change the view of the black cross. Hold the left button and without releasing it, move the unit to the desired place in the picture. Drag the block with the textWhile you get a white field framed by a black frame. Type the desired fragment in place instead of the text example and format it according to your requirements (font size, color, style, etc.). The size of the block is also changed. It can be expanded or reduced. Now you need to remove a white background and framing. To do this, simply click on the label and go to the "Format" tab. Lay and click in the "Styles" group on the "Filling of Filight" button. A menu will fall out where to select "No Fill", and the background will turn off. It's possible to remove the frame. In the same group, click "Contour of Figures", and in the list, click "No Contour". The command disables the framing. Form - PouringStandard Word tools you can create a well-designed signature, any color, style, size. It is much more convenient and faster than using graphic editors.

    Method number 2: Object Vocard

    There is another interesting receipt of the creation of an inscription - the insertion of the Wordart object. In fact, this is the same text field that only having a more interesting stylization of the font (with a shadow, reflection, volume, and so on). In the "Insert" tab, click the "Add Wordart Object" button in the form of a blue rotated letter A. Display visual examples. Select what is suitable for the image and simply click on the sample. Wordart.Now enter the necessary information in the block and drag the resulting on the picture.

    Method number 3: flowing text

    The method is good if the picture is used as the entire page substrate. On the inserted picture, right-click and select the "Flashing Text" string in the context menu. Next, click "Text". Text objectNow fill the document as usual. Only the background will serve as a drawing, and not a standard white color. With the help of the given techniques you can easily make a well-designed text in the picture. At the same time, the need for graphic editors disappears.
  • When preparing text documents that use explanatory photos, there is a need to sign these very images. It is more convenient to do this under or above the picture, but it is not always possible due to restrictions on the number of characters or the number of pages of the document. This article is about how to apply to the text in the Word. It is worth noting that the mechanism of this procedure is identical for the versions of the editor from 2007 to 2016.

    Text block

    To impose text to the drawing using special blocks you need to do the following:

    1. Add a photo to a document in any known way.

    How to apply to the picture in the Word

    1. Go to the Insert tab and click on the inscription. Microsoft Office Word offers two options for adding an object: a separate button or through the Figure menu.

    How to apply to the text in Word 1

    1. Insert the inscription and move to the image. You can use ready-made patterns or create your own block with the necessary dimensions.

    How to apply to the image in Word 2

    1. Remove a white background using the fill string, and an inscription contour using the outline button, in the format menu that appears when you click on the object. Also in this tab, you can conduct the necessary editing of the inscription with the addition of shadow, volume, text directions and the order of drawing.

    How to apply for the text in Word 3

    1. Final result:

    How to apply for the text in Word 5

    Flooding text

    To write in the picture Description You can use the function of the position or flow around the text. You can find them in the format tab on the toolbar.

    How to apply to the picture in Word 6

    In the string, flow around you choose a string behind the text and the picture will be on the back background, on top of which you can write any text.

    How to apply to the text in Word 7

    Tip! To immediately see the result of the use of flow setting, you can use the Position function.

    Alternately choosing the proposed options, you watch the changes and use the one that comes best.

    How to apply to the picture in Word 8

    Wordard

    To create a beautiful photo signature, you can use the WordArt tool. For this you need to do the following:

    1. Go to the Insertion section and search for the same button.

    How to apply the text to the picture in Word 9

    1. Choose from the proposed samples liked the template.

    How to apply to the picture in Word 10

    1. Drag the resulting text on the picture.

    Recommendation! In order to less problems with the placement of the block, we recommend the Vault object to put on the forefront, and the image is on the rear.

    How to apply text in the Word

    1. By clicking on the inscription, in the format on the toolbar that appears on the toolbar, you can use a wide range of settings for editing the StarT block at your discretion. Here you will find the shadows, the volume, the order of drawing, position in the text, various styles. There is also the opportunity to adjust the words in the inscription using a separate button.

    As you can see, there are many ways to add text to the picture to the Word. Such capabilities of the text editor allow you to save time when writing documents. At the same time, the need to use programs for working with graphics, so-called graphic editors, completely disappears.

    Share with your friends!

    Jim "Like" and only get the best posts in Facebook ↓

    If, working with a document, in the MS Word text editor, you want to write something in the picture, for example, explain some image fragments, or just make a beautiful inscription, then in this article we are with you and consider.

    You can print words over the picture or pictures, or using Wordart figures, or making the usual inscription. Now let's tell about these two ways.

    If you need to make an image as a background to the Word, then click on the link, and read the details on this topic.

    We assign text to the picture using Wordart

    First, write in the picture, with Wordart. This is ready-made style, a certain color, size, form, with shadow, extrusion and other. Of course, you can change all these parameters for yourself. For example, I like the style myself, and the color can be changed, instead of choosing yellow.

    Insert the image into the Word Public Document, go to the "Insert" tab and in the "Text" section, click on the "WordArt" button. The drop-down list from which select the appropriate style for you and click on it.

    An article about how to insert an image into a Word, already on the site.

    How to insert the text in the picture in the Word

    This area will appear in the picture. The text of the example will be highlighted. Press the "Delete" button to delete it, and write what you need.

    How to insert the text in the picture in the Word

    Now click on the border of the inscription - the dotted line, and without releasing the left mouse button, drag the block to the image.

    How to insert the text in the picture in the Word

    That's what happened to me.

    How to insert the text in the picture in the Word

    If you want to change a little added in the style of Wordart text, then click on it to highlight. Then open the "drawing tools" - "format". Here you can either completely change the style of Wordart, or add background, borders, the desired effect.

    How to insert the text in the picture in the Word

    We make text in the picture using the inscription

    Insert the necessary words over the picture can be used by creating an ordinary inscription. Open the document and add an image to it. Then on the "Insert" tab, click the "Figures" button and select the "Inscription" from the list - a rectangle with the letter and at the top.

    How to insert the text in the picture in the Word

    The cursor takes the type of cross. Click in the desired place of the image left mouse button and, without releasing buttons, draw a rectangular area. Enter the desired text in the created area.

    So that the text looked unusually, you can turn the text to the Word to 30, 90 degrees or select any other angle of rotation.

    How to insert the text in the picture in the Word

    If you do not fit the white rectangle background and the presence of boundaries, select "Drawing Tools" - "Format". Click on the "Fill Fill" and "Figure" "buttons, then click from the" No Pour "list," no contour "- respectively.

    How to insert the text in the picture in the Word

    To change the appearance of the written, go to the "Text" tab and in the "Font" section, select the desired size and font itself. You can change the color of the letters, add the shadow, make the text italics or bold.

    Read more about Formatting and editing to Word, you can read the article on the link.

    How to insert the text in the picture in the Word

    Using one of the described methods, you will definitely manage to write in a picture or picture in MS Word the desired word or phrase. And so that it looks beautiful, increase the font, select a color for letters, add the shadow to the inscription, or simply use one of the proposed Wordart styles.

    Loading…

    How to place text over the picture in Word

    Usually, in order to insert the text in the picture, users use raster graphics editors. For example, Adobe Photoshop or other similar programs. But, in many situations you can do without the use of such powerful programs. In this material you will learn two ways at once, How to insert text in a picture in Word 2007, 2010, 2013 or 2016.

    Video on the topic: how to insert text in the picture in Word: overlay text over the picture in Word

    Method No. 1. Simple inscription.

    The easiest way to insert the text to the picture in the Word text editor is to use the "Inscription" function. To do this, go to the "Insert" tab, click on the "Inscription" button and select the "Simple Inscription" option that appears.

    Text in the picture
    We choose a simple inscription

    After that, a frame with text appears on the page. A feature of this frame is that it allows you to place text anywhere in Word. At the same time, various manipulations can be performed over the text in this frame. For example, you can rotate the text at an angle.

    Text in the picture
    Enter text

    In order to insert the text in the picture in the Word, you need to move the frame with the text to your image. To do this, simply click the left mouse button on the edge of the frame and not releasing the mouse button. Move the frame to the desired location.

    As a result, it should be approximately the result, as in the picture below.

    Text in the picture

    Next you need to highlight the text in the frame inside the frame and change it. So you insert the text you need into the picture.

    Text in the picture

    If you want to remove a white background under the text, you need to install the cursor to the frame with the text and go to the "Format" tab. Here you need to click on the "Fill Fill" button and select the option "no fill".

    Text in the picture
    We choose no fill

    You can remove the contour around the text. To do this, click on the "Figure circuit" button on the "Format" tab and select the option "no contour".

    Text in the picture
    We choose no contour

    After that you will get just text over the picture.

    Text in the picture

    This method is convenient not only that allows you to insert the text anywhere in the picture. It still allows you to use additional text design.

    To take advantage of these features, you need to highlight the text, go to the "Format" tab and select one of the proposed text styles.

    Text in the picture
    Choose text style

    As a result, you can get, for example, such a text inserted over the picture.

    As in Word (Word) insert text in the picture

    And all this solely with the help of the text editor capabilities. Word.

    Method number 2. Curving text.

    The second way to put the text in the picture in the Word is to use the function called "flowing text".

    To do this, click right-click on the picture inserted into the Word and in the context menu that appears to select the option "Flooding text".

    As in Word (Word) insert text in the picture
    Choose behind the text

    After that, the picture can be freely moved by Word document and at the same time it will always be under the text.

    Thanks to this, you can pose a picture below the text you need. So you can insert the text in the picture in the right place of the document. Word. .

    As in Word (Word) insert text in the picture

    This method is especially convenient when using large pictures that occupy all the Word sheet space.

    Dear reader! Add this site to bookmark your browser and share with friends link to this site! We try to show all sorts of tricks and secrets here. It will be useful for sure.

    It is also interesting:

    How to make in Word Animation? Effect.

    How to make a page frame in the Word?

    How to make a landscape page in Word. Step by step.

    Usually, in order to insert the text in the picture, users use raster graphics editors. For example, Adobe Photoshop or other similar programs. But, in many situations you can do without the use of such powerful programs. In this material you will learn two ways at once, how to insert text in the wall in Word 2007, 2010, 2013 or 2016.

    Method No. 1. Simple inscription.

    The easiest way to insert the text to the picture in the Word text editor is to use the "Inscription" function. To do this, go to the "Insert" tab, click on the "Inscription" button and select the "Simple Inscription" option that appears.

    Insert a simple inscription to the Word Document

    After that, a frame with text appears on the page. A feature of this frame is that it allows you to place text anywhere in Word document. At the same time, various manipulations can be performed over the text in this frame. For example, you can rotate the text at an angle.

    Frame with text in Word

    In order to insert the text in the picture in the Word you need to move the frame with the text to your image. To do this, simply click the left mouse button on the edge of the frame and not releasing the mouse button. Move the frame to the desired location. As a result, you should get about the same result as in the screenshot below.

    Frame with text over pictures

    Next you need to highlight the text in the frame inside the frame and change it. So you insert the text you need into the picture.

    Change text inside the picture

    If you want to remove a white background under the text, you need to set the cursor to the frame with the text and go to the "Format" tab. Here you need to click on the "Fill Fill" button and select the option "no fill".

    Remove the fill under the text

    You can remove the contour around the text. To do this, click on the "Figure circuit" button on the "Format" tab and select the option "no contour".

    Remove the frame around the text

    After that you will get just text over the picture.

    Text over the picture

    But this method is convenient not only by the way that allows you to insert the text anywhere in the picture. It still allows you to use additional text design. To take advantage of these features, you need to highlight the text, go to the "Format" tab and select one of the proposed text styles.

    Decoration of text

    As a result, you can get, for example, such a text inserted over the picture.

    Text with design over the picture

    And all this solely with the capabilities of the Word text editor.

    Method number 2. Curving text.

    The second way to put the text in the picture in the Word is to use the function called "flowing text". To do this, click right-click on the picture inserted into the Word and in the context menu that appears to select the option "Flooding text".

    Customize flowing text

    After that, the picture can be freely moved by Word document and at the same time it will always be under the text. Thanks to this, you can pose a picture below the text you need. Thus, you can insert the text in the picture in the desired place of Word document.

    Move the picture to the right place

    This method is especially convenient when using large pictures that occupy all the Word sheet space.

    annotation

    This article describes adding text to an image or figure in Word 2010 application. Face of Male Co-Worker Questioning Something

    I created a document in Word 2010, but I do not like his appearance. How to decorate it? Girl Co-Worker Noticing Something

    In Word 2010, you can add text to an image or figure. What if you put a document header in a figure or image? Do you know how to do it? Face of Male Coworker Saying Something

    You need to press the shape button on the ribbon and choose the figure you like, right? After selecting the figure, the mouse pointer takes the appearance of the cross. You need to choose a place to insert the shape. Girl Co-Worker Explaining Something

    Before inserting the header in the figure, it is recommended to configure its size and style. We put the text in the figure at all. Right-click the Figure Border and select Add Text. The text will be added to the figure. MALE CO-WORKER NEUTRAL FACE

    Text added! After inserting the text setting his style in the Font or Paragraph group on the Home tab. Girl Co-Worker Explaining Something

    You can change the location and color of the figure by clicking its border and selecting the Figure format item. The Figure Format dialog box opens. Face of Male Coworker With Exclamation Mark

    Ready! Looks good! Girl Co-Worker Face

    If you want to apply text to the image, create an inscription on it. To insert an image, press the Picture button or the Package tab on the Box tab. For more information about pictures, see Document "Search for Images". Face of Male Coworker

    Well, choose this picture. Everything, it is inserted and configured. Girl Co-Worker Smiling

    Now insert the inscription. On the Insert tab in the Text group, click the Inscription button. Then choose the inscription style. Face of Male Co-Worker Smiling.

    And then you need to put an inscription on the image, right? You can change the font style lettering. This uses functions in the Font or Paragraph group on the Home tab. Ready! Girl Co-Worker Explaining Something

    You can change the inscription font style. This uses functions in the Font or Paragraph group on the Home tab. Face of Male Co-Worker Smiling.

    After inserting the text in the image, the document began to look much more attractive. Many thanks!


    Добавить комментарий