Статьи

How to make Hard Reset on Android (full reset): detailed instructions [photo, video] 2019

How to make Hard Reset on Android (full reset): 2 Resetting techniques with a step-by-step action description

For reading 3 min. Views 1.4K. Published Updated

Full (or hard) Reset - deleting all user data in order to return the system to the original state. It is possible through the phone settings directly in the system, through the service code and hardware reset via the recovery mode (system recovery mode), which in this case will be called Hard Reset. There are no differences, the latter is used in cases where the phone does not get to the phone.

Why do you need a hard reset

The full reset function of the settings is needed when errors and failures that cannot be corrected by other paths occurred in the device. At the same time, the data from external cards (SIM, memory card) will not be deleted. In order to delete data from a memory card or clear completely internal phone memory, you will need to select it before restarting the system.

How to make a hard reset through the phone settings (software reset)

  1. Go to the phone menu, settings.
  2. Go to the "Built-in Memory" section and select the item "Reset to factory settings". This is the most common option, details can vary. For example, instead of the "Built-in memory" menu, the reset can be in the "Privacy" menu, "Restore and Reset". Resetting Android settings
  3. To delete all data from the memory card, you can select the "Clear SD card" pen.

We should not forget that, depending on the phone and version of the operating system, the menu items name may differ from the specified.

We produce hardware android (Recovery Android)

There are cases when the phone is not loaded, and there is no possibility to enter the menu. In this case, you need to run the phone or tablet in Recovery mode. In this mode, you can go through the phone with a closed button combination. But the problem is that combinations vary depending on firms or even phone models, so we will give instructions in general form, and then references to specific models of devices.

  1. Turn off the phone.
  2. At the same time, clamp the volume button (or increase the volume), the button home (usually a large button in the center under the screen) in the event that it is on the device and the power button.
  3. After the download is started, release the buttons.
  4. In the menu that appears about the help of the volume changes buttons, select Wipe Data / Factory Reset and confirm the home button selection (or the on button). WIPE DATA / FACTORY RESET
  5. In the next menu, select Yes - Delete All User Data, after which the first menu will be reset and displayed. In the same way, we select the Reboot System Now in it and after a few minutes the phone will turn on.

Video: Example Hard Reset on Samsung Galaxy S3 Duos phone

It must be taken into account that these actions lead to the complete deletion of all user data from the memory of the device. Contacts, SMS messages loaded through mail applications and so on will be removed from the memory. From the memory card (including internal phone memory), photos, video, music are not deleted.

But before performing full reset, it is recommended to make backup copies.

Video: How to make a full reset on the Lenovo smartphone

Instructions for popular HTC, Samsung phones models, Sony Xperia you can find on the following topics:

Full Reset SAMSUNG Full Reset HTC Full Reset LG Full Reset Sony Ericsson Xperia Full Reset Acer Loading ...Loading ...

Reset to factory settings is a procedure at which the accumulated data is deleted in the phone, and the operating system returns to the initial configuration. There is an opinion that to use the discharge of the smartphone is recommended at least two times a year. This will allow you to get rid of excess garbage and extend the life of the device.

When you may need to reset to the factory settings

Return to the factory configuration on Android is carried out for two reasons:

  • Sale or exchanging gadget. To save time and not to eliminate information with individual files, it is better to make a complete reset;
  • Reduced performance. Over time, productivity begins to fall in smartphones or tablets. This happens when the duration of work is reduced and overheating appears. In essential cases, a huge number of program debris accumulates in system folders.

Depending on the functional and structural features of the devices, there are many reset methods to the initial state. The procedure will be able to fulfill with staff or specialized programs.

Resetting the settings for Android through the Gadget menu

An obvious way to perform the task is to use the smartphone menu. The user does not have to apply applications or combinations of buttons. If one of the latest version of Android is installed in the gadget, you will need to do the following:

  • Unlock smartphone;
  • Expand the center of the settings;
  • Use the recovery unit or reset. There are shells OS with another title;
  • At the next stage, a page will open in which you want to use the reset button;
  • To prevent data delete, it is recommended to create a backup timely.

Making a reset to factory settings in Android

Attention! When the user clicks on the button, a rollback to the initial state is activated in the device. It is strictly prohibited at this moment to get a battery or resort to an emergency reboot of the OS.

Reset digital codes

Another effective method to reset your device without applying third-party software. For example, for Gadgets based on Android, a wide range of various combinations is provided.

It is worth noting that each manufacturer of gadgets assigns its own reset codes. For this reason, before carrying out the procedure, you need to clarify a combination for a specific model.

It is also important to remember that not all Android devices have such an opportunity. Therefore, if the existing model is not equipped with such a function, it is recommended to use in another way. The procedure is done as follows:

  • Activate the phone application;
  • In the new window, insert a combination of numbers;
  • Expect the phone to restart.

Return to the factory state with the help of recovery

Today, in each gadget on the basis of the Android operating system, a special recovery mode is enabled - recovery. It allows you to adjust some parameters and roll back the phone to the initial configuration. The owner of the device will need to perform only a few pages of the physical keys. It is worth considering that the technique will differ depending on the brand and model of the device.

Many devices have a special button with a return home function. This is one of the controls that will be involved when starting the mode. The principle of launch is short-clicking some keys. Factory reset is performed on this instruction:

  • Completely turn off the gadget;
  • Use the volume and power adjustment button;
  • Expect the appearance of the restorative menu;
  • A list in which you want to select "Wipe Data / Factory Reset".
  • Some manufacturers may have the inscription "Clear Flash" and "Clear EMMC";
  • Next, you need to tap on the deletion line of user files;
  • Upon completion click on the system reset button.

Making a reset to factory settings in Android

Important! To move in the recovery menu, you need to use one of the buttons to adjust the volume. Confirm the selected command can be powered by the power button. There are also models in which the recovery provides for the use of the touch panel.

Reset settings with a separate button

The modern mobile technology market is increasingly updated with smartphones with a separate button to roll back to the initial state. It should be a shallow hole, inside which the switch is directly located. To use the key, the user will need to use a subtle object - needle, paper clip, etc.

Making a reset to factory settings in AndroidHowever, remember - by clicking on the hardware switch, all user information from the device will be irrevocably erased. To avoid it, you need a backup of data packets.

Smartphone models and their hardware keys

Often users are tormented by the issue relating to the implementation of the Hard Reset. Below is a list of smartphones, which is characterized by its methodology for the procedure. It is worth noting that even for one manufacturer, the instruction will be different. It depends on the version of the OS, the year of production and structural features of the model:

  • Samsung. Simultaneous clamping the power key, "home" and increasing the volume. On some models, you will need to press the power button and the volume down;
  • LG. In this case, you will need to clamp the power button for a few seconds and the volume decreases. When the logo appears, release and repeat the combination again. Keep until the recovery menu opens;
  • Huawei. For this brand of smartphones there are two ways. First of all, you need to hold the power button for 10 seconds and reduce the volume. There is also a method in which you want to hold the middle of the volume controller and the inclusion key;
  • Lenovo. In the case of Lenovo models, three methods are provided - simultaneously pressing the reduction / increase volume and the power button. You can also clamp the power button until the device wins. Finally, it is worth using the power button and increasing volume;
  • Sony. In the first case, you need to press the inclusion key to increase the volume. It is also possible to use a special button that is recessed into the device body. However, first you need to connect the phone to the network and expect the Android icon on the display;
  • Xiaomi, Meizu. To start the function, you need to click on the Start button and increasing the volume. When the logo appears, the power key is released, and hold the volume;
  • Acer, ASUS. Press the volume and the power button;
  • Prestigio, BQ. In the case of devices of this manufacturer, you need to press the "Start" key, as well as an increase or decrease in volume.

Reset to factory settings using a computer

This method is resorted in cases where the standard methods were unsuccessful. Before proceeding with the procedure, the user must download and install the Android System Development Kit on the computer. How to reset the factory settings on android:

  • Visit Mobile Device Settings;
  • In the developers section, find the "USB Debugging" mode;
  • Next, you need to check the box on USB tools;
  • In your computer, install software for interacting with mobile devices;
  • Connect the smartphone to the PC using the original USB wire;
  • Activate the command line;
  • Enter the following address "C: \ Users \ Username \ APPDATA \ Local \ Android \ Android-SDK \ Tools";
  • In the recovery introduce ADB reboot;
  • Expect while rebooting the system.

Making a reset to factory settings in Android

Attention! Not recommended during the reset process, disconnect the phone from the computer. Otherwise, the firmware may be damaged.

How to restart Android

To restart Smartphones based on Android, several methods are provided:

  • Standard reboot. In this case, the owner of the device will have to take advantage of the staff. First you need to press the power button for a few seconds, after which the window opens with a choice of action. Among them should choose "Restart";
  • Forced reboot. This kind of restart is needed in cases where the smartphone freezes or slows down. The reasons for such behavior can be somewhat - overheating of the battery, scored storage, etc.;
  • Emergency reboot. To this method should be resorted when the device stops responding to any actions. For this procedure, you need to get the battery, give it to cool and after a while you turn on the device. You can also use the combination to start the recovery menu.

Illusion of data deletion

It is worth noting that the kickback to the initial configuration deletes personal data, but it does not completely. In this case, the system erases only the addresses of those folders in which the files were located, and the content itself remains in Flash memory. It is for this reason that many specialized utilities allow you to restore remote information after reset. To avoid similar circumstances, it is recommended to familiarize yourself with the following procedures.

Data encryption

In smartphones there is a special tool responsible for encryption of personal information. As a rule, it is in the settings. To find it, you need to go to the section "Security / Encryption Data". The essence of encryption is to install specifically code, as a graphic key or classic PIN can act. If you put the lock in a timely manner, even after restoring the files it will be impossible to open without specifying the provided password.

Overwrite unnecessary data

A fairly effective method with which you can encrypt personal information. The essence lies in the fact that the user will need to make several discharges. After the first procedure, you need to fill in the internal storage of the device with capacious unnecessary files. Then it will be necessary to make the second Hard Reset, after which the necessary files in flash memory will be interpreted by unnecessary content. Also for this you can use third-party software. For example, in Play Market there is an ISHREDDER 6 application, which allows you to score the gadget repository with informational garbage. An additional functionality of the utility can also be attributed to the ability to delete before resetting specific folders, files, applications and cache.

What you want to do before discharge of data

First of all, the user must take care of the safety of personal data. Of course, you can connect the device to the PC and copy the necessary information to a stationary device. However, the backup creation function is integrated into the mobile OS. What is needed for this:

  • Open system settings;
  • Go to the memory block;
  • Find a backup point;
  • Go to the "Google Disc" tab;
  • Move the slider in front of the "Create Backup Data Backup" string. Also can manually move the necessary information to a computer or other device.

Making a reset to factory settings in Android

Copy from the device Important information

The procedure methodology depends on what device information will be copied:

  • A computer. In this case, you will need a USB cord, which will be able to connect the smartphone. Next, you need to highlight important data and transfer them to the specified folder on the PC. However, this applies exclusively to the media system. If it comes to copying contacts and other similar data, you will need to install a special manager. One of the most popular is Airdroid;
  • Another smartphone. Bluetooth can be used to transfer files to another mobile device.

Making a reset to factory settings in Android

Delete Google Account from Device

There are situations where the owner of the mobile device is required to disconnect from his account Google. For example, it can be associated with the sale or exchange of smartphones. To perform the procedure, it is recommended to adhere to this manual:

  • Open device settings;
  • Select a section with accounts and go to the "Users and Accounts" tab;
  • Find your profile;
  • Click on the removal key;
  • To confirm the procedure, you will need to specify the security code.

What if the device does not turn on and requires Google account

In some smartphones, after rollback to the original state, when you start the OS, I request an input of the Google account. Continue work will be able only after the user writes the password and login from the profile, which was previously tied to the gadget. For this reason, the account data is recommended to write in advance.

What to do if the device does not turn on or hangs

In this case, there are several solution solutions. First, you can try to reset. Perhaps the process occurred in the process, due to which the reset was improper.

In the extreme case, you will need to flash. To do this, there are special programs through which the operating system is reinstated in the mobile device. Inexperienced users are recommended to contact the repair center.

RESULTS

The most efficient and secure way to reset is the use of device settings. Only they are recommended to use when the phone does not freeze and respond to commands. Otherwise, users are resorting for help to the restorative menu.

Relying on the opinion of experts, hard reset is required several times a year. This approach will make rid of excess garbage that accumulated during operation. In this case, it is recommended to make a backup of important information.

The need to reset the Android settings may occur in completely different situations: the device began to hang, ceased to turn on or you simply cannot unlock it. And if no action helped solve the problem, Hard Reset is a real opportunity to restore the device's performance. From the article you will learn what to do.

Android reset settings

(!) If you forgot the graphical key, PIN or password, first read these instructions: reset blocking, android password and how to do with ADB.

Well, if after these manuals, you still need help with removing blocking or you have other problems with the device, carefully read this article. It is worth noting that after Hard Reset from the phone or tablet, data is deleted only from internal memory. SD files, photos, music, video, etc. Will be untouched.

Method 1. How to reset the Android settings via Recovery

The first way is relevant for those who do not turn on at all, it works faulty or you need to return access to the smartphone system:

1. Turn off the device.

2. Now it is necessary to get into Recovery mode. To do this, clamp and hold a specific keyboard shortcut until the screen is lit. Depending on the manufacturer of the device, the combination may differ:

  • Reduce volume + power button
  • Volume Increase + Enable Button
  • Increase / lower volume + power button + Home button
  • Volume Increase + Rewinding Volume + Enable Button

How to go to Recovery Mode on the phones of various brands is written in the new article.

how to go to recovery

Using the zoom buttons, the volume decreases can be moved up and down, respectively, and confirm your choice - the on / lock button. In newer devices, the recovery menu can be sensory.

3. Select "WIPE DATA / FACTORY RESET".

recovery.

4. Next, select "Yes - Delete All User Data".

So you consent to clean the internal memory of the smartphone / tablet.

WIPE ALL USER DATA

5. And at the end of the "Reboot System Now".

Restarting the system from recovery

The whole process will take no more than a minute. After all Android actions, the phone or tablet will reboot - the factory parameters will be restored. You will get the device as it was when you first start.

MEIZU recovery mode

Meizu made their recovery mode instead of classic recovery. To get to it, use the "On" + Volume "UP" combination. Note only the Clear Data item and click Start.

Meizu Recovery.

We perform Wipe from the recovery on Xiaomi

The Xiaomi engineering menu is loaded when the power key and VOLUME "+" is pushed. It is available in several languages ​​- to switch from Chinese to English, press:

Change Language Xiaomi Recovery Menu

1. Select "Recovery"

Xiaomi engineering menu

2. Click OK if you are going to go to recovery mode.

Confirm Enter To Recovery

3. Press "WIPE DATA". Here the sensor does not work, use the power and volume keys to select and move.

Xiaomi Recovery Mode.

4. Next "WIPE ALL DATA".

WIPE ALL DATA Xiaomi Recovery

5. Confirm by clicking "Confirm".

Confirm Wipe All Data

6. The device will inform the successful implementation of Wipe. Open the main menu.

Data Wiped SuccessFully.

7. To restart the smartphone, select "Reboot".

Reboot System From Recovery

8. Then "Reboot to System".

Reboot to System Xiaomi

The first download of the Android system after resetting the settings may take a few minutes.

Method 2. How to make Hard Reset through settings

1. Go to Android settings.

2. Open the "Restore and Reset" item. Do not forget to back up.

Menu Settings

3. Select "Reset Settings".

Restoration and Reset Android

4. Then click "Reset phone settings (Tablet PC)".

Reset Android settings

5. If a graphic key is installed or a password, you need to enter it.

Entering a graphic key

6. At the end, click "Erase All".

Hard Reset.

After that, all data will be reset from the internal memory of the device.

On Android 8.0 Oreo and above

The "Settings" menu in Android 8.0 has undergone strong changes. Now the "Reset to the factory settings" function is in the "System" section → "Reset".

How to reset settings to factory on Android 8.0 Oreo

On Meizu.

In Flyme OS, the path to the function is different from the stock of Android: go "Settings" → "On the phone" → "Memory" → "Reset settings".

Meizu Hard Reset.

Mark the "Delete Data" item and click Restore.

On Xiaomi.

In MIUI, the Factory Reset feature, the developers hid in "Additional Settings" - see the video instruction:

A USB drive is also cleared on Xiaomi smartphones, so take care of creating a backup if you want to save photos, audio and other files.

Method 3. Resetting the settings for Android

This method is even easier than previous. In the dialer, dial one of the following secret (service) codes. Perhaps none of them will work, everything depends on the manufacturer here:

  • * 2767 * 3855 #
  • * # * # 7780 # * # *
  • * # * # 7378423 # * # *

Also try entering these codes in the "Emergency Call".

4. We carry out Hard Reset from FastBoot Mode

You can clear the internal memory of the Android device using the FastBoot utility for the PC when the machine is loaded in the same mode (if any on the smartphone). On the installation and startup of the program, as well as ADB and USB drivers, told in the new FAQ. On such devices as Nexus, Pixel, Huawei, HTC, Sony, Motorola, the last LG must first unlock the bootloader:

  • On Nexus - team FastBoot OEM Unlock.
  • On Nexus 5X, 6P and PIXEL - Activate the OEM Unlock option in the "For Developer" settings, apply the command FastBoot Flashing Unlock.
  • For the rest, you will additionally get an individual code on the manufacturer's website.

(!) Unlocking bootloader is carried out via FastBoot and immediately makes Wipe. In the future, to reset the phone, it is enough to perform actions from the instruction.

Translate the device to FastBoot mode. There are 2 ways:

First. Turn off your smartphone. Then clamp and hold the "ON" + buttons to the volume before the FastBoot Mode appears. This shortcut of the keys may differ depending on the manufacturer.

Login to FastBoot using buttons

Second. Carefully read how to work with ADB and FastBoot, the link to the article is above. Connect the phone to the computer by activating the USB debugging (see instruction). Then enter the ADB command via the command line (or PowerShell in Windows 10) running on the administrator name and press "ENTER":

AdB Reboot Bootloader.

For Windows PowerShell to execute this command, add at the beginning:

\

It turns out like this:

. \ adb reboot bootloader

AdB Reboot Bootloader.

The device is loaded in firmware mode. To erase the data, it is enough to execute one of the commands (do not forget to add \ When using PowerShell):

FastBoot Erase UserData.

or

FastBoot -w.

FastBoot Erase UserData.

To restart the device, use:

FastBoot Reboot

Team FastBoot Reboot

5. How to delete data from the phone through the service "Find Device"

Google has developed a special service "Find the device", with which you can not only track the phone, but also reset its settings. To do this, the device must be connected to the Internet.

1. Go to the site and log in.

Authorization in the Google Service Find Device

2. Google will find devices attached to this account. Click "Erase Data".

Search for tablet

3. Next again, select "Erase Data".

Google Find Device - Erase Data

4. Confirm the selection by clicking "Clear".

Confirm memory cleaning

As a result, internal memory will be cleaned on the smartphone or tablet.

6. If installed TWRP Recovery

Unlike the standard recovery mode, the Custom TWRP recovery allows you to reset the specific sections, and not all settings immediately.

To do this, in the main menu, open "WIPE".

TWRP Recovey

If you just want to make Factory Reset, pull the slider to the right.

Factory Reset TWrp.

If you want to format specific partitions, select ADVANCED WIPE.

Advanced Wipe TWrp.

Mark the sections you want to clean and make swipe to the right.

SELECT PARTITION TO WIPE

To restart Android, click "Reboot System".

TWRP Reboot System

That's all. In fact, no difficulties with resetting the settings on Android should not arise, the whole process will take no more than 5 minutes.

The level of complexity: for beginners. The Android mobile operating system can be not only a convenient tool for performing everyday tasks with a smartphone, but also a very capricious rider with hangs, errors and problems. One of the cardinal and correct ways to solve problems with the "tired" system is the full reset of the android smartphone to the factory settings. The need for this event may arise if necessary for the sale of a device in the secondary market.

So, you finally decided that it was time to reset the settings to the factory, because when buying a smartphone "flew", and now there are tangible delays when opening the menu items or starting applications. There are several ways to reset.

Important! Before performing a common reset, make sure that you saved all the data stored in the smartphone memory: photos, contacts, SMS messages, notes. Reset to factory settings will completely delete the information stored in the device's memory.

Method 1: Reset to factory settings through the menu

The easiest option to return the Android-smartphone pre-sale status is to reset to factory settings from the corresponding menu item. This option is relevant for devices that do not experience critical problems with moving through the menu items of the system.

1. Open the "Menu" - "Settings" and select "Restore and Reset".

How to reset android smartphone to factory settings How to reset android smartphone to factory settings

2. Scroll to the open list at the bottom and click on the "Reset Settings" item (the name of this item on different smartphones may look different: "Reset phone settings", "Common Reset", "Erase all data", etc.).

How to reset android smartphone to factory settings

The system will warn that all personal information, settings, applications and data will be deleted during reset.

3. Confirm the execution of the operation to reset the settings by selecting "Erase All" item.

Method 2: Reset using hardware keys

Depending on the current state of the device, it may be necessary to complete the overall reset using the hardware keys of the smartphone. If your device is tightly freezes on the logo when loading, or immediately after loading the system, problems begins to move through the menu items, infinitely pop-up errors and a complete failure in the adequate operation of the capacitive screen, this option of resetting the settings is what you need.

1. Hold down the power key and hold it until the smartphone is completely turned off.

2. Go to Recovery Recovery mode while holding two (less than three) specific keys at the same time. Depending on the manufacturer of the smartphone, the key combination required to go to Recovery mode may vary.

ASUS, Acer.

  • Volume Reduction + Power Key

Lenovo.

  • Volume Enlargement + Volume Reduction Key + Power Key.
  • Press and hold the power key until vibration appears. Several times press the volume key.
  • Volume Enlarge + Power Key.

Huawei.

  • Key Mind Volume size + power key. Hold for 10 seconds.
  • Hold down the volume key in the middle + power key. Hold 10 seconds. After the logo appears, release the power key (hold the volume key). After the picture of the "robot with gears", move your finger from the center of the volume keys to the volume button. Release the key after the green page of the download status.

LG

Volume Reduction Key + Power Key. After the logo appears, release both keys for 1 second and immediately hold them again. Hold before entering Recovery mode.

Samsung

  • Key "Home" + Volume Enlarge + Power Key.
  • Volume Reduction + Power Key.

Sony

  • Key of the took place Volume and Power Key.
  • Connect the device to the network and wait until the green power indicator lights up. Find a hole with a resetting button RESET and with the help of a clips click on it. As soon as the screen is lit, clamp the power key for a few seconds. Release Cl. We have a power supply and press the sound enlarge key several times.

Prestigio.

  • Keys And increasing the volume + power key.
  • The key is reduced Paste volume + power key.

Meizu, Xiaomi.

  • Key Increase the volume + power key. The power key to let go immediately after the logo appears, with the HC key The loudness of the volume continue to hold.

3. Wait until the Recovery menu appears.

How to reset android smartphone to factory settings

4. In case the Recovery menu does not respond to a touch of fingers, use the increasing / reduction keys (up / down, respectively) to move on items. To confirm the selection of a specific menu item once, press the power key.

5. To reset the smartphone to the factory settings, select WIPE DATA / Factory Reset.

How to reset android smartphone to factory settings

6. In the menu that opens, agree with the removal of data using the power key again pressing.

How to reset android smartphone to factory settings

7. At this point, the removal of all data from the smartphone will begin and reset it to the factory settings. After the reset is completed, select Reboot System (Restart Device).

As soon as the smartphone reboots, you will get a complete "clean" device with factory settings and without personal data.

Method 3: Reset with a digital combination

Another option is a simple reset to factory settings - the use of digital combinations.

1. Open the phone application.

2. Enter one of the code options:

* # * # 7378423 # * # *

* # * # 7780 # * # *

* 2767 * 3855 #

If necessary, press the call key.

3. The smartphone will restart, after which the process of resetting the settings will begin.

A source: 4pda.ru.

How to make a complete reset of smartphone settings

Resetting the settings to the factory or Hard Reset is a very convenient feature that can help if many problems with a smartphone occur. But many users reset the settings to the factory is not entirely correct and at the end of the discharge of problems becomes even more.

In this article we will tell you how to make a Hard Reset smartphone.

Hard Reset - what is it

This is a complete reset of the phone settings at which all your user data and settings, files, applications, contacts are deleted. In general, the smartphone returns to the state in which you bought it.

Hard Reset - how to make

There are two ways to make a complete reset settings.

1. Go to "Settings", go to "Restore and Reset", and select "Restore to Factory Settings". Next, select "Reset All", the phone will reboot and return to the factory settings.

2. When the phone is turned off, simultaneously clamp the volume button up and the power button, the phone will switch to Recovery mode. In the menu that opens, select "WIPE DATA / FACTORY RESET", confirm the action and by completing you select "Reboot System Now". The smartphone will restart and return to the state of the factory settings.

Note: Resetting the settings may differ, depending on the smartphone model.

We recommend before full reset settings, create a backup of the data. This item can be found in "Restore and Reset". If this feature is not supported, you can copy the data in Google Drive.

Important: Now the most important, in the latest versions of the Android, the developers have entered the protection of "Factory Reset Protection". If you reset the phone settings, when you first turn on, you will need to enter the Google account data. But it often happens that we either do not remember the account, or bought a smartphone with hands and do not know the data accordingly. If we do not enter the Google account data, we will not be able to use the smartphone.

So that this does not happen, we need to get out of Google's account or delete it.

To do this, go to "Settings" and select "Accounts", then go to Google account and exit from the account or delete it. After these actions, you can safely reset the settings to the factory, without surviving that when you start, you will need to enter the forgotten account data of Google.

Thanks for your attention, we hope our article was useful to you.

We invite you to our groups on social networks Odnoklassniki. и In contact with Subscribe not to miss new computer tips.

Do not forget to subscribe to the channel " Computer tricks "And put like, we have more interesting for you.

How to make hard reset for android

The need to reset the settings (hard reset) on android may occur in completely different situations: the device began to hang, stopped turning on or you just can't unlock it. And if no action helped solve the problem, Hard Reset is a real opportunity to restore the device's performance. From the article you will learn what to do.

CONTRACT: how to make hard reset on android

(!) If you forgot the graphic key, PIN or password, first read these instructions: Reset Lock, Android Password  и How to do with ADB

Well, if after these manuals, you still need help with removing blocking or you have other problems with the device, carefully read this article. It should be immediately noted that after Hard Reset from the phone, only data from internal memory will be deleted. SD files, photos, music, video, etc. Will be untouched.

How to make hard reset for android

Method 1. How to reset the Android settings via Recovery

The first way is relevant for those who do not turn on at all, it works faulty or you need to return access to the smartphone system:

1. Turn off the device.

2. Now it is necessary get into recovery mode . To do this, clamp and hold a specific keyboard shortcut until the screen is lit. Depending on the manufacturer of the device, the combination may differ:

  • Reduce volume + power button
  • Volume Increase + Enable Button
  • Increase / lower volume + power button + Home button
  • Volume Increase + Rewinding Volume + Enable Button

How to go in Recovery Mode. On the phones of various brands is written in this new article - How to go to the RECOVERY menu on Android

How to reset the Android settings via Recovery

Using the zoom buttons, the volume decreases can be moved up and down, respectively, and confirm your choice - the on / lock button. In newer devices, the recovery menu can be sensory.

3. Select " WIPE DATA / FACTORY RESET "

How to reset the Android settings via Recovery

4. Next, select " YES - Delete All User Data "

So you consent to clean the internal memory of the smartphone / tablet.

How to reset the Android settings via Recovery

5. And at the end " Reboot System Now. "

How to reset the Android settings via Recovery

The whole process will take no more than a minute. After all Android actions, the phone or tablet will reboot - the factory parameters will be restored. You will get the device as it was when you first start.

MEIZU recovery mode

Meizu made their recovery mode instead of classic recovery. To get to it, use the combination " Incl "+. VOLUME. «Up. " Mark only the item " Clear Data. " and press " Start. "

MEIZU recovery mode

We perform Wipe from the recovery on Xiaomi

The Xiaomi engineering menu is loaded when the power key and VOLUME "+" is pushed. It is available in several languages ​​- to switch from Chinese to English, press:

We perform Wipe from the recovery on Xiaomi

1. Select " Recovery. »

We perform Wipe from the recovery on Xiaomi

2. Click " OK "If you are going to go to recovery mode.

We perform Wipe from the recovery on Xiaomi

3. Click " Wipe Data. " Here the sensor does not work, use the power and volume keys to select and move.

We perform Wipe from the recovery on Xiaomi

4. Next " WIPE ALL DATA. "

We perform Wipe from the recovery on Xiaomi

5. Confirm by clicking " Confirm. "

We perform Wipe from the recovery on Xiaomi

6. The device will inform the successful implementation of Wipe. Open the main menu.

We perform Wipe from the recovery on Xiaomi

7. To restart the smartphone, select " Reboot "

We perform Wipe from the recovery on Xiaomi

8. Then " Reboot to System "

We perform Wipe from the recovery on Xiaomi

The first download of the Android system after resetting the settings may take a few minutes.

Method 2. How to make hard reset through settings

1. Go to Android settings.

2. Open the item " Restoration and reset " Do not forget to execute backup .

How to make hard reset through settings

3. Select " Reset "

How to make hard reset through settings

4. Then click " Reset phone settings (Tablet PC) "

How to make hard reset through settings

5. If a graphic key is installed or a password, you need to enter it.

How to make hard reset through settings

6. At the end, click " Erase "

How to make hard reset through settings

After that, all data will be reset from the internal memory of the device.

Reset Android settings 8 8.0 Oreo and above

Menu " Settings "Android 8.0 has undergone strong changes. Now the function " Reset to factory settings "Located in the section" System »→" Reset "

Reset Android settings 8 8.0 Oreo and above

Hard reset on Meizu

Flyme OS The path to the function is different from the stock android: Go Settings »→" About the phone »→" Memory »→" Reset "

Hard reset on Meizu

Tick ​​item " Delete data "And click" Restore "

Hard reset on Xiaomi

In miui feature Factory Reset. Developers hid in " Additional settings " Go along the way Settings  > Additionally  > Restoration and reset  > Reset

Hard reset on Xiaomi

Hard reset on Xiaomi

In the menu that opens, you can clear all the data from the SD card and the MI account. We are interested in the "Reset Settings" button, click on it.

Hard reset on Xiaomi

If a graphic key is specified on the smartphone - you will need to enter it. After that, the factory settings will be restored. On Xiaomi smartphones, a USB drive is also cleared, so take care in advance about creating backup If you want to save photos, audio and other files.

Method 3. Resetting the settings for Android

This method is even easier than previous. In the dialer type one of the following Secret (service) codes . Perhaps none of them will work, everything depends on the manufacturer here:

  • * 2767 * 3855 # 
  • * # * # 7780 # * # * 
  • * # * # 7378423 # * # * 

Also try entering the codes in " Emergency call "

Method 4. We carry out a hard reset from FastBoot mode

Clear the internal memory of the Android device can be using the utility FastBoot. For PC, when the machine is loaded in the same mode (if any on the smartphone). About installing and starting the program as well ADB. and USB drivers, told - HERE . On such devices like Nexus, Pixel, Huawei, HTC, Sony, Motorola, the latest LG must first Unlock bootloader :

On Nexus - team

FastBoot OEM Unlock. 

On the Nexus 5x, 6p and Pixel - activate the option " OEM UNLOCK. " in settings " For developer "Apply the command

FastBoot Flashing Unlock. 

For the rest, you will additionally get an individual code on the manufacturer's website.

(!) Bootloader unlocking is carried out via FastBoot and immediately makes Wipe. In the future, to reset the phone, it is enough to perform actions from the instruction. 

Translate the device to FastBoot mode. There are 2 ways:

First . Turn off your smartphone. Then clamp and hold the buttons " Incl »+ Lowering volume before appearance FastBoot Mode. . This shortcut of the keys may differ depending on the manufacturer.

We carry out hard reset from FastBoot mode

Second . Carefully read how to work with ADB and FastBoot, the link to the article is above. Connect the phone to the computer by activating the USB debugging (see. Instruction ). Then enter ADB command through Command line (or PowerShell in Windows 10), running on behalf of the administrator and click " ENTER ":

AdB Reboot Bootloader. 

For Windows PowerShell to execute this command, add at the beginning:

\ 

It turns out like this:

. \ adb reboot bootloader 

We carry out hard reset from FastBoot mode

The device is loaded in firmware mode. To erase the data, it is enough to execute one of the commands (do not forget to add \ When using PowerShell):

FastBoot Erase UserData. 

or

FastBoot -w. 

We carry out hard reset from FastBoot mode

To restart the device, use:

FastBoot Reboot 

We carry out hard reset from FastBoot mode

Method 5. How to delete data from the phone through the service "Find Device"

Google has developed a special service " Find a device ", With which you can not only track the phone, but also reset its settings. To do this, the device must be connected to the Internet.

1. Go to the site and log in.

How to delete data from the phone through the service "Find Device"

2. Google will find devices attached to this account. Click " Erase the data "

How to delete data from the phone through the service "Find Device"

3. Next again select " Erase the data "

How to delete data from the phone through the service "Find Device"

4. Confirm the selection by clicking " Clear "

How to delete data from the phone through the service "Find Device"

As a result, internal memory will be cleaned on the smartphone or tablet.

Method 6. Hard Reset If installed TWRP Recovery

In contrast to the standard recovery regime, Castomnoy TWRP recovery Allows you to make a reset of specific sections, and not all settings immediately.

To do this, in the main menu, open " WIPE. "

Hard Reset If you are installed TWRP Recovery

If you just want to make Factory Reset, pull the slider to the right.

Hard Reset If you are installed TWRP Recovery

If you want to format specific sections, select " Advanced Wipe. "

Hard Reset If you are installed TWRP Recovery

Mark the sections you want to clean and make swipe to the right.

Hard Reset If you are installed TWRP Recovery

To restart Android, click " Reboot System. "

Hard Reset If you are installed TWRP Recovery

That's all. In fact, no difficulties with resetting the settings on Android should not arise, the whole process will take no more than 5 minutes.


Добавить комментарий